- New
PROX Rear Wheel Bearing Kit for SUZUKI LT 250, LTF 250 1988-2001
€44.90
Tax Included
PROX wheel bearing kit for SUZUKI LT 250, LTF 250 from 1988 to 2001.
The PROX 23.S112099 wheel bearing kit is designed for SUZUKI LT 250, LTF 250 from 1988 to 2001. Wheel bearings carry the whole weight of the bike and take every landing, in mud, water and sand. When they develop play or feel notchy, the wheel wobbles, the disc rubs on the pads and the bike holds its line less well.
Specifications
- Brand: PROX
- Manufacturer part number: 23.S112099
- Weight: 310 g
When to replace it?
- Wheel play: with the bike on a stand, grab the wheel at the top and bottom and rock it.
- With the axle out, bearings that turn with tight spots or a grinding noise.
- Brake disc rubbing on and off against the pads.
- Hub seals hardened or torn, rust around the axle.
Check the wheels for play after every pressure wash or ride through water, and replace the bearings at the slightest play or tight spot. Always change all the bearings in a wheel at the same time, together with their seals: a new bearing fitted next to a worn one won't last.
Fitting tips
- Remove the wheel, then the side spacers and the hub seals.
- Drive the bearings out with an expanding bearing puller, or from inside the hub by pushing the centre spacer aside and tapping alternately on each side of the inner race.
- Clean the hub, warm it slightly (around 80 °C, with a heat gun) and fit the new bearings, pressing only on the outer race.
- Put the centre spacer back between the bearings, then fit new seals packed with waterproof grease.
- Refit the wheel, torque the axle to the figure in the manual and check that the wheel spins freely, with no play.
Why PROX?
ProX Racing Parts has been supplying off-road riders since 1975 from its headquarters near Amsterdam. Beyond the engine and clutch, its catalogue covers chassis wear parts: wheel bearings, seals and spacers.
Spare parts and items to plan
- Grease : MOTUL 400 g
- Wheel seals : see the selection
- Wheel spacers : see the selection
Frequently asked questions
Should I change the bearings on both sides?
Yes: replace all the bearings in the wheel together, they have the same amount of wear. It's also the moment to fit new wheel seals.
What is the centre spacer for?
It keeps the bearings the right distance apart when you tighten the axle. If it's left out or badly positioned, the bearings get crushed sideways and only last a few hours.
Why do my bearings wear out so fast?
A pressure-washer jet aimed at the hub, worn seals or scored spacers let water in. Change the seals along with the bearings and avoid aiming at the hubs when you wash the bike.
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
SUZUKI LT 250 1992
SUZUKI LT 250 1991
SUZUKI LT 250 1990
SUZUKI LT 250 1989
SUZUKI LT 250 1988
SUZUKI LTF 250 2001
SUZUKI LTF 250 2000
SUZUKI LTF 250 1999
SUZUKI LTF 250 1998
SUZUKI LTF 250 1997
SUZUKI LTF 250 1996
SUZUKI LTF 250 1995
SUZUKI LTF 250 1994
SUZUKI LTF 250 1993
SUZUKI LTF 250 1992
SUZUKI LTF 250 1991
SUZUKI LTF 250 1990
SUZUKI LTF 250 1989
SUZUKI LTF 250 1988
23.S112099
Specific References
No customer reviews for the moment.
PROX wheel bearing kit for SUZUKI LT 250, LTF 250 from 1988 to 2001.
PROX Rear Wheel Bearing Kit for SUZUKI LT 250, LTF 250 1988-2001
€44.90
Tax Included