MOTO-MASTER Racing sintered Front/Rear Brake Pads for HONDA ATC, XL, XLR, XR 125, 250, 350, 500, 600 1983-2000

The MOTO-MASTER 090411 set of brake pads is designed for HONDA ATC 250, XL 350, XL 600, XLR 125, XR 250, XR 350, XR 500, XR 600 from 1983 to 2000. The pads clamp the disc to slow the bike down. Off-road, they work in mud, water and sand, which wear them quickly: pads in good condition keep the braking powerful and easy to modulate.

Specifications

• Brand: MOTO-MASTER
• Manufacturer part number: 090411
• EAN code: 5707367117864
• Compound: sintered metal
• Weight: 230 g
• Engine: 4-stroke

When to replace it?

• Friction material worn below the minimum thickness in the manual (often 1 to 2 mm), or wear groove gone.
• Metallic grinding noise when braking.
• Lever or pedal going further, brakes with less bite.

Check pad thickness before every ride, especially in muddy conditions. Never wait for metal-to-metal contact: it scores the disc within a few stops.

Fitting tips

1. Push the caliper pistons back while keeping an eye on the brake fluid level in the reservoir, which will rise.
2. Clean the caliper and the pad pin, and replace the pin if it's marked.
3. Fit the pads with their spring or clip, the right way round, then pump the lever or pedal until you get normal travel back.
4. Check the condition of the disc: a disc that's too thin or warped wears out new pads.
5. Bed in the pads with a dozen progressive stops before riding hard.

Why MOTO-MASTER?

In motocross, Moto-Master was working with the Red Bull KTM Factory Racing team as early as 2010, and it backed the MXGP world championship in 2015. On the technical side, the Flame profile of its discs is designed to improve cooling and go easy on the pads, and its Racing GP sintered pads use a backing plate with hooks (NRS technology) that stops the friction material from coming away.

Spare parts and items to plan

• Brake disc : TRW · MOTO-MASTER
• Brake fluid : MOTUL 500 ml · LIQUI MOLY 250 ml

Frequently asked questions

Sintered or organic?
Sintered (metallic) pads last longer and stay effective in mud and water: they're the benchmark for motocross and enduro. Organic pads are gentler on the disc and bite well from cold.

Should both sides be changed?
Always replace the complete set for a given caliper, and check the disc while you're at it.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA ATC 250 1986
HONDA ATC 250 1985
HONDA XL 350 1990
HONDA XL 350 1989
HONDA XL 350 1988
HONDA XL 350 1987
HONDA XL 350 1986
HONDA XL 350 1985
HONDA XL 350 1984
HONDA XL 600 1987
HONDA XL 600 1986
HONDA XL 600 1985
HONDA XL 600 1984
HONDA XL 600 1983
HONDA XLR 125 2000
HONDA XLR 125 1999
HONDA XLR 125 1998
HONDA XR 250 1987
HONDA XR 250 1986
HONDA XR 250 1985
HONDA XR 250 1984
HONDA XR 350 1987
HONDA XR 350 1986
HONDA XR 350 1985
HONDA XR 500 1986
HONDA XR 500 1985
HONDA XR 500 1984
HONDA XR 500 1983
HONDA XR 600 1987
HONDA XR 600 1986
HONDA XR 600 1985