• New
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022

    VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022

    Review (0)
    €202.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Available in several sizes.

    Rating :
    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      VERTEX offers this piston kit for TM RACING EN 300, MX 300 2006-2022. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a cast piston?

      A cast piston is made by pouring liquid aluminium into a mould: it is what most manufacturers fit as standard, especially on two-strokes.

      • High-silicon alloy: it expands little, is fitted with tight clearance and stays quiet when cold.
      • Good wear resistance of the skirt and ring grooves.
      • Lower price than a forged piston, for OEM quality in normal use.
      • Limit: less tolerant of overheating and highly tuned engines.

      Why choose VERTEX?

      Vertex has made its pistons in Italy since 1953 and has supplied KTM’s original pistons since 1996: molybdenum-disulphide coated skirt and Japanese rings. Its two-stroke pistons are cast from an 18 % silicon alloy.

      When should you replace the piston on your TM RACING MX 300?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

      Specifications and fitting tips

      • Material: Aluminium
      • Piston compression: Standard
      • Rings Quantity: 1
      • Stroke: 2T

      Available in several sizes: choose the one that matches your cylinder (stamped size or measured bore). Diameters: A = 71.93 mm, B = 71.94 mm, C = 71.95 mm.

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      TM RACING EN 300 2019
      TM RACING EN 300 2018
      TM RACING EN 300 2017
      TM RACING EN 300 2016
      TM RACING EN 300 2015
      TM RACING EN 300 2014
      TM RACING EN 300 2013
      TM RACING EN 300 2012
      TM RACING EN 300 2011
      TM RACING EN 300 2010
      TM RACING EN 300 2009
      TM RACING EN 300 2008
      TM RACING EN 300 2007
      TM RACING EN 300 2006
      TM RACING MX 300 2022
      TM RACING MX 300 2021
      TM RACING MX 300 2020
      TM RACING MX 300 2019
      TM RACING MX 300 2018
      TM RACING MX 300 2017
      TM RACING MX 300 2016
      TM RACING MX 300 2015
      TM RACING MX 300 2014
      TM RACING MX 300 2013
      TM RACING MX 300 2012
      TM RACING MX 300 2011
      TM RACING MX 300 2010
      TM RACING MX 300 2009
      TM RACING MX 300 2008
      TM RACING MX 300 2007
      TM RACING MX 300 2006

      VERTEX
      23703A
      4 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
      VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
      VERTEX Cast Replica Piston Kit for TM RACING EN 300, MX 300 2006-2022
      €202.90
      Tax Included