MOTO-MASTER Racing GP sintered Rear Brake Pads for BETA REV3 125, REV3 200, REV3 250, REV3 270, REV 80 2005-2010

On BETA REV3 125, REV3 200, REV3 250, REV3 270, REV 80 from 2005 to 2010, the MOTO-MASTER 099312 set of brake pads fits in place of the original part. Pressed against the disc by the caliper, the pads turn the bike's energy into heat. Their friction material wears a little with every stop, and even faster in muddy conditions.

Specifications

• Brand: MOTO-MASTER
• Manufacturer part number: 099312
• EAN code: 8790497024499
• Compound: sintered metal
• Weight: 130 g
• Engine: 2-stroke

When to replace it?

• Friction material worn below the minimum thickness in the manual (often 1 to 2 mm), or wear groove gone.
• Metallic grinding noise when braking.
• Lever or pedal going further, brakes with less bite.

Check pad thickness before every ride, especially in muddy conditions. Never wait for metal-to-metal contact: it scores the disc within a few stops.

Fitting tips

1. Push the caliper pistons back while keeping an eye on the brake fluid level in the reservoir, which will rise.
2. Clean the caliper and the pad pin, and replace the pin if it's marked.
3. Fit the pads with their spring or clip, the right way round, then pump the lever or pedal until you get normal travel back.
4. Check the condition of the disc: a disc that's too thin or warped wears out new pads.
5. Bed in the pads with a dozen progressive stops before riding hard.

Why MOTO-MASTER?

Moto-Master is a Dutch brand founded in 1997 by Gaston Vernon that specialises in braking: discs, sintered pads and oversize kits. Its discs are designed in CAD and then laser-cut on CNC machines, with manufacturing in the Netherlands and ISO 9001:2015 certification.

Spare parts and items to plan

• Brake disc : NG 259 · NG 645
• Brake fluid : MOTUL 1 L · LIQUI MOLY 500 ml

Frequently asked questions

Sintered or organic?
Sintered (metallic) pads last longer and stay effective in mud and water: they're the benchmark for motocross and enduro. Organic pads are gentler on the disc and bite well from cold.

Should both sides be changed?
Always replace the complete set for a given caliper, and check the disc while you're at it.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
BETA REV3 125 2006
BETA REV3 200 2006
BETA REV3 250 2006
BETA REV3 250 2005
BETA REV3 270 2005
BETA REV 80 2010
BETA REV 80 2009
BETA REV 80 2008