BERINGER Repair Kit Master Cylinder BR12/CR12

BERINGER offers this master cylinder rebuild kit. The master cylinder is the pump at the lever (or pedal): when you squeeze, its piston pushes fluid down the hose to the brake caliper or the clutch slave cylinder.

Why a rebuild kit?

The benefits:

• A firm, consistent lever again, without buying a whole new master cylinder.
• The kit groups the parts that wear together: everything is changed in one go.
• You keep your original master cylinder, its adjustments and its mountings.

Why choose BERINGER?

Beringer, founded in 1985 in the Loire and based in Saint-Jean-d’Ardières, has developed its brakes in racing for more than 30 years: aerospace-grade aluminium calipers and master cylinders machined from solid, with a range dedicated to motocross, enduro and supermoto.

When should you replace this part?

Fluid weeping at the lever or pedal, a lever that goes soft or comes back to the grip, a cracked or distorted diaphragm: rebuild the master cylinder.

Specifications and fitting tips

• Manufacturer part number: KITREPBR12

Cross-Mania tip: Clean the bore with brake fluid and check it is neither scored nor pitted, fit the seals coated in fresh fluid, then bleed; only use the specified fluid (DOT or mineral oil).

Compatibility

Universal part: check the dimensions given before ordering.