• New
    VHM Top End Gasket Kit for HUSQVARNA TX 300, KTM SX 300 and GAS GAS EX 300 2023-2024
    VHM Top End Gasket Kit for HUSQVARNA TX 300, KTM SX 300 and GAS GAS EX 300 2023-2024

    VHM Top End Gasket Kit for HUSQVARNA TX 300, KTM SX 300 and GAS GAS EX 300 2023-2024

    Review (0)
    €11.90
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    VHM top end gasket kit for KTM SX 300, HUSQVARNA TX 300 and GAS GAS EX 300 from 2023 to 2024.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

      The VHM SK33210 top end gasket kit is designed for KTM SX 300, HUSQVARNA TX 300 and GAS GAS EX 300 from 2023 to 2024. The top end gasket kit brings together the gaskets to replace every time the cylinder head or cylinder comes off. A gasket crushed by tightening never gets its shape back: refitting it means risking a compression, coolant or oil leak, and having to strip everything down again.

      Specifications

      • Brand: VHM
      • Manufacturer part number: SK33210

      When to replace it?

      • Coolant or oil seeping at the head/cylinder or cylinder/crankcase joint.
      • Coolant level dropping, bubbles in the radiator.
      • Hissing or black marks where the exhaust leaves the cylinder.

      At every piston change and every time the cylinder head or cylinder is removed, even for a simple inspection. Gaskets cost little compared with the work of stripping the engine.

      Fitting tips

      1. Clean the gasket faces without scratching them (plastic scraper, solvent): they must be clean, dry and free of burrs.
      2. Fit the gaskets dry, without sealant, unless the workshop manual says otherwise.
      3. Refit a base gasket of the same thickness as the old one, unless you are deliberately adjusting the squish.
      4. Tighten the cylinder head in a criss-cross pattern, in several stages, up to the manufacturer's torque.
      5. While it's apart, replace the spark plug and refill the coolant.
      6. After break-in, check the torque with the engine cold and make sure there are no leaks.

      Why VHM?

      Since 1995, VHM has been designing racing engine parts for two-strokes: cylinder heads with interchangeable inserts, combustion chamber inserts, crankshafts and connecting rods. A specialist brand, used to fine-tune an engine's power without transforming it.

      Spare parts and items to plan

      Frequently asked questions

      What does the kit contain?
      Depends on the model. Compare with your original gaskets if in doubt.

      Should I replace it along with the piston?
      Yes: as soon as the cylinder head and cylinder are off, new gaskets go back on. It's the right time to fit a new piston kit and new rings if the engine has some hours on it.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EX 300 2024
      HUSQVARNA TX 300 2024
      HUSQVARNA TX 300 2023
      KTM SX 300 2024
      KTM SX 300 2023

      VHM
      SK33210
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      VHM Top End Gasket Kit for HUSQVARNA TX 300, KTM SX 300 and GAS GAS EX 300 2023-2024
      VHM Top End Gasket Kit for HUSQVARNA TX 300, KTM SX 300 and GAS GAS EX 300 2023-2024
      VHM Top End Gasket Kit for HUSQVARNA TX 300, KTM SX 300 and GAS GAS EX 300 2023-2024
      €11.90
      Tax Included