• New
    ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002
    ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002

    ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002

    Review (0)
    €4.50
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The gasket between cylinder and head: it holds compression and keeps water, oil and gases apart.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

    Wishlist
    Write your review

      ATHENA offers this cylinder head gasket for HUSQVARNA CR 360, WR 360 1993-2002. The head gasket takes the pressure and heat of every combustion. It is crushed when the head is torqued down and must be replaced every time the head comes off.

      Why replace this gasket every time it is removed?

      The benefits:

      • A new gasket guarantees a perfectly sealed joint.
      • Material designed to withstand heat, oil and coolant.
      • An inexpensive part that saves doing the job twice.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the head gasket on your HUSQVARNA WR 360?

      Loss of compression, a dropping coolant level, bubbles in the radiator or traces between cylinder and head: the gasket needs changing. It is also replaced every time the head comes off.

      No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 20 h of hard use and every 40 h of leisure riding.

      Specifications and fitting tips

      • Material: FKM (Viton)
      • Manufacturer part number: M752009000094

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 360 2002
      HUSQVARNA CR 360 2001
      HUSQVARNA CR 360 2000
      HUSQVARNA CR 360 1994
      HUSQVARNA CR 360 1993
      HUSQVARNA WR 360 2002
      HUSQVARNA WR 360 2001
      HUSQVARNA WR 360 2000
      HUSQVARNA WR 360 1999
      HUSQVARNA WR 360 1998
      HUSQVARNA WR 360 1997
      HUSQVARNA WR 360 1996
      HUSQVARNA WR 360 1995
      HUSQVARNA WR 360 1994
      HUSQVARNA WR 360 1993

      ATHENA
      M752009000094

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002
      ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002
      ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002
      ATHENA Cylinder Head Gasket O-ring Ø90.00 x 2 mm for HUSQVARNA CR 360, WR 360 1993-2002
      €4.50
      Tax Included