• New
    ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002
    ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002

    ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002

    Review (0)
    €234.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Available in several sizes.

    Rating :
    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    Wishlist
    Write your review

      ATHENA offers this piston kit for HUSQVARNA CR 360, WR 360 1992-2002. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose ATHENA?

      Athena, the Italian manufacturer founded in 1973, is an original-equipment supplier to manufacturers such as KTM and Ducati: the same standards for your replacement parts.

      When should you replace the piston on your HUSQVARNA WR 360?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

      Specifications and fitting tips

      • Engine: 2-stroke
      • Manufacturer part numbers: S4F07800001A (A), S4F07800001B (B), S4F07800001C (C)

      Available in several sizes: choose the one that matches your cylinder (stamped size or measured bore). Diameters: A = 77.94 mm, B = 77.95 mm, C = 77.96 mm.

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 360 2002
      HUSQVARNA CR 360 2001
      HUSQVARNA CR 360 2000
      HUSQVARNA CR 360 1998
      HUSQVARNA CR 360 1997
      HUSQVARNA CR 360 1996
      HUSQVARNA CR 360 1995
      HUSQVARNA CR 360 1994
      HUSQVARNA CR 360 1993
      HUSQVARNA CR 360 1992
      HUSQVARNA WR 360 2002
      HUSQVARNA WR 360 2001
      HUSQVARNA WR 360 2000
      HUSQVARNA WR 360 1999
      HUSQVARNA WR 360 1998
      HUSQVARNA WR 360 1997
      HUSQVARNA WR 360 1996
      HUSQVARNA WR 360 1995
      HUSQVARNA WR 360 1994
      HUSQVARNA WR 360 1993
      HUSQVARNA WR 360 1992

      ATHENA
      S4F07800001A
      5 Items

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002
      ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002
      ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002
      ATHENA Racing Forged Piston ref. S4F07800001 for HUSQVARNA CR 360, WR 360 1992-2002
      €234.90
      Tax Included