• New
    ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993
    ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993

    ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993

    Review (0)
    €6.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The gasket between cylinder and head: it holds compression and keeps water, oil and gases apart.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

    Wishlist
    Write your review

      ATHENA offers this cylinder head gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993. The head gasket takes the pressure and heat of every combustion. It is crushed when the head is torqued down and must be replaced every time the head comes off.

      Why replace this gasket every time it is removed?

      The benefits:

      • A new gasket guarantees a perfectly sealed joint.
      • Material designed to withstand heat, oil and coolant.
      • An inexpensive part that saves doing the job twice.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the head gasket on your HUSQVARNA WR 260?

      Loss of compression, a dropping coolant level, bubbles in the radiator or traces between cylinder and head: the gasket needs changing. It is also replaced every time the head comes off.

      No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 20 h of hard use and every 40 h of leisure riding.

      Specifications and fitting tips

      • Material: FKM (Viton)
      • Manufacturer part number: M752603525094

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 250 1991
      HUSQVARNA CR 250 1990
      HUSQVARNA CR 250 1989
      HUSQVARNA WR 240 1991
      HUSQVARNA WR 240 1990
      HUSQVARNA WR 240 1989
      HUSQVARNA WR 250 1991
      HUSQVARNA WR 250 1990
      HUSQVARNA WR 250 1989
      HUSQVARNA WR 260 1993
      HUSQVARNA WR 260 1992
      HUSQVARNA WR 260 1991
      HUSQVARNA WR 260 1990
      HUSQVARNA WR 260 1989
      HUSQVARNA WRK 240 1989
      HUSQVARNA WRK 250 1991
      HUSQVARNA WRK 250 1990
      HUSQVARNA WRK 250 1989
      HUSQVARNA WRK 260 1993
      HUSQVARNA WRK 260 1992
      HUSQVARNA WRK 260 1991
      HUSQVARNA WRK 260 1990
      HUSQVARNA WRK 260 1989

      ATHENA
      M752603525094

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993
      ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993
      ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993
      ATHENA Cylinder Head Gasket for HUSQVARNA CR 250, WR 240, WR 250, WR 260, WRK 240, WRK 250, WRK 260 1989-1993
      €6.90
      Tax Included