• New
    ATHENA Cylinder Head Gasket O-ring Ø75.92 x 1.78 mm for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014
    ATHENA Cylinder Head Gasket O-ring Ø75.92 x 1.78 mm for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014

    ATHENA Cylinder Head Gasket O-ring Ø75.92 x 1.78 mm for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014

    Review (0)
    €4.50
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    The gasket between cylinder and head: it holds compression and keeps water, oil and gases apart.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      ATHENA offers this cylinder head gasket for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014. The head gasket takes the pressure and heat of every combustion. It is crushed when the head is torqued down and must be replaced every time the head comes off.

      Why replace this gasket every time it is removed?

      The benefits:

      • A new gasket guarantees a perfectly sealed joint.
      • Material designed to withstand heat, oil and coolant.
      • An inexpensive part that saves doing the job twice.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the head gasket on your HUSQVARNA WR 250?

      Loss of compression, a dropping coolant level, bubbles in the radiator or traces between cylinder and head: the gasket needs changing. It is also replaced every time the head comes off.

      No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 20 h of hard use and every 40 h of leisure riding.

      Specifications and fitting tips

      • Material: FKM (Viton)
      • Manufacturer part number: M751807570094

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSQVARNA CR 250 2004
      HUSQVARNA CR 250 2003
      HUSQVARNA CR 250 2002
      HUSQVARNA CR 250 2001
      HUSQVARNA CR 250 2000
      HUSQVARNA CR 250 1999
      HUSQVARNA CR 250 1996
      HUSQVARNA CR 250 1995
      HUSQVARNA CR 250 1994
      HUSQVARNA CR 250 1993
      HUSQVARNA CR 250 1992
      HUSQVARNA CR 250 1991
      HUSQVARNA WR 250 2014
      HUSQVARNA WR 250 2013
      HUSQVARNA WR 250 2012
      HUSQVARNA WR 250 2011
      HUSQVARNA WR 250 2010
      HUSQVARNA WR 250 2009
      HUSQVARNA WR 250 2008
      HUSQVARNA WR 250 2007
      HUSQVARNA WR 250 2006
      HUSQVARNA WR 250 2005
      HUSQVARNA WR 250 2004
      HUSQVARNA WR 250 2003
      HUSQVARNA WR 250 2002
      HUSQVARNA WR 250 2001
      HUSQVARNA WR 250 2000
      HUSQVARNA WR 250 1999
      HUSQVARNA WR 250 1998
      HUSQVARNA WR 250 1997
      HUSQVARNA WR 250 1996
      HUSQVARNA WR 250 1995
      HUSQVARNA WR 250 1994
      HUSQVARNA WR 250 1993
      HUSQVARNA WR 250 1992
      HUSQVARNA WR 300 2014
      HUSQVARNA WR 300 2013
      HUSQVARNA WR 300 2012
      HUSQVARNA WR 300 2011
      HUSQVARNA WR 300 2010
      HUSQVARNA WR 300 2009
      HUSQVARNA WRK 250 1994
      HUSQVARNA WRK 250 1993
      HUSQVARNA WRK 250 1992
      HUSQVARNA WRK 250 1991

      ATHENA
      M751807570094
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Cylinder Head Gasket O-ring Ø75.92 x 1.78 mm for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014
      ATHENA Cylinder Head Gasket O-ring Ø75.92 x 1.78 mm for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014
      ATHENA Cylinder Head Gasket O-ring Ø75.92 x 1.78 mm for HUSQVARNA CR 250, WR 250, WR 300, WRK 250 1991-2014
      €4.50
      Tax Included