- New









VHM cylinder head insert for KTM SX 125, XCW 125, HUSQVARNA TC 125, TX 125 and GAS GAS MC 125 from 2016 to 2023. Available in Version B (11.20 cc), Version 040 (11.20 cc), Version C (11.40 cc), Version 029 (11.40 cc), Version E (11.60 cc), Version 026 (11.60 cc), Version 031 (11.80 cc), Version F (11.80 cc).
The VHM cylinder head insert is designed for KTM SX 125, XCW 125, HUSQVARNA TC 125, TX 125 and GAS GAS MC 125 from 2016 to 2023. On a VHM cylinder head, the combustion chamber is an interchangeable insert (or dome). Changing the insert changes the chamber volume, and therefore the compression ratio, without modifying the head: you adapt the engine to the fuel, the terrain and your riding.
Each version is defined by three dimensions: the chamber volume in cm³ (spark plug hole included), the piston height at top dead centre relative to the top of the cylinder (“−0.55”: piston 0.55 mm below the cylinder face) and the squish, the minimum gap between piston and insert. A smaller volume raises compression: more bottom end and mid-range, but a higher-octane fuel may become necessary.
Change the insert when you change fuel or type of riding, or if the engine pinks. The insert's three dimensions (volume, piston height, squish) must match your engine.
Since 1995, VHM has been designing racing engine parts for two-strokes: cylinder heads with interchangeable inserts, combustion chamber inserts, crankshafts and connecting rods. A specialist brand, used to fine-tune an engine's power without transforming it.
Will it fit my original cylinder head?
No: VHM inserts only fit VHM cylinder heads.
Which version should I choose?
Choose according to your engine and fuel. Version B (11.20 cc): 11.20 cc, piston height 0.00 mm, squish 0.90 mm; Version 040 (11.20 cc): 11.20 cc, piston height 0.00 mm, squish 0.90 mm; Version C (11.40 cc): 11.40 cc, piston height 0.00 mm, squish 0.90 mm; Version 029 (11.40 cc): 11.40 cc, piston height 0.00 mm, squish 0.90 mm; Version E (11.60 cc): 11.60 cc, piston height 0.00 mm, squish 0.90 mm; Version 026 (11.60 cc): 11.60 cc, piston height 0.00 mm, squish 0.90 mm; Version 031 (11.80 cc): 11.80 cc, piston height 0.00 mm, squish 0.90 mm; Version F (11.80 cc): 11.80 cc, piston height 0.00 mm, squish 0.90 mm.
Check the exact model and year of your bike in the list below before ordering.
Fits:
GAS GAS MC 125 2023
GAS GAS MC 125 2022
GAS GAS MC 125 2021
HUSQVARNA TC 125 2022
HUSQVARNA TC 125 2021
HUSQVARNA TC 125 2020
HUSQVARNA TC 125 2019
HUSQVARNA TC 125 2018
HUSQVARNA TC 125 2017
HUSQVARNA TC 125 2016
HUSQVARNA TX 125 2019
HUSQVARNA TX 125 2018
HUSQVARNA TX 125 2017
KTM SX 125 2022
KTM SX 125 2021
KTM SX 125 2020
KTM SX 125 2019
KTM SX 125 2018
KTM SX 125 2017
KTM SX 125 2016
KTM XCW 125 2019
KTM XCW 125 2018
KTM XCW 125 2017
Click on your bike to see all compatible parts.
No customer reviews for the moment.