• New
    ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009
    ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009
    ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009

    ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009

    Review (0)
    €236.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Available in several sizes.

    Rating :
    Quantity :
    On order

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      ATHENA offers this piston kit for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose ATHENA?

      Athena, the Italian manufacturer founded in 1973, is an original-equipment supplier to manufacturers such as KTM and Ducati: the same standards for your replacement parts.

      When should you replace the piston on your HUSABERG FC 600?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 30 h in hard use and every 60 h for leisure.

      Specifications and fitting tips

      • Engine: 4-stroke
      • Manufacturer part numbers: S4F09500003A (A), S4F09500003B (B), S4F09500003C (C)

      Available in several sizes: choose the one that matches your cylinder (stamped size or measured bore). Diameters: A = 94.94 mm, B = 94.95 mm, C = 94.96 mm.

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HUSABERG FC 501 2009
      HUSABERG FC 501 2008
      HUSABERG FC 501 2007
      HUSABERG FC 501 2006
      HUSABERG FC 501 2005
      HUSABERG FC 501 2004
      HUSABERG FC 501 2003
      HUSABERG FC 501 2002
      HUSABERG FC 501 2001
      HUSABERG FC 501 2000
      HUSABERG FC 501 1999
      HUSABERG FC 600 2008
      HUSABERG FC 600 2007
      HUSABERG FC 600 2006
      HUSABERG FC 600 2005
      HUSABERG FC 600 2004
      HUSABERG FC 600 2003
      HUSABERG FC 600 2002
      HUSABERG FC 600 2001
      HUSABERG FC 600 2000
      HUSABERG FC 600 1999
      HUSABERG FC 600 1998
      HUSABERG FC 600 1997
      HUSABERG FC 600 1996
      HUSABERG FC 600 1995
      HUSABERG FC 600 1994
      HUSABERG FE 501 2009
      HUSABERG FE 501 2008
      HUSABERG FE 501 2007
      HUSABERG FE 501 2006
      HUSABERG FE 501 2005
      HUSABERG FE 501 2004
      HUSABERG FE 501 2003
      HUSABERG FE 501 2002
      HUSABERG FE 501 2001
      HUSABERG FE 501 2000
      HUSABERG FE 501 1999
      HUSABERG FE 600 2008
      HUSABERG FE 600 2007
      HUSABERG FE 600 2006
      HUSABERG FE 600 2005
      HUSABERG FE 600 2004
      HUSABERG FE 600 2003
      HUSABERG FE 600 2002
      HUSABERG FE 600 2001
      HUSABERG FE 600 2000
      HUSABERG FE 600 1999
      HUSABERG FE 600 1998
      HUSABERG FE 600 1997
      HUSABERG FE 600 1996
      HUSABERG FE 600 1995
      HUSABERG FE 600 1994

      ATHENA
      S4F09500003A
      0 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009
      ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009
      ATHENA Racing Forged Piston for HUSABERG FC 501, FC 600, FE 501, FE 600 1994-2009
      €236.90
      Tax Included