• New
    PROX crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012
    PROX crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012

    PROX crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012

    Review (0)
    €131.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      PROX offers this crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Application: Crankshaft
      • Style: 4-stroke
      • Built to exact OEM specifications for maximum performance and durability
      • Includes all bearings/seals required to replace the component (unless otherwise stated)

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      BETA RR 250 2007
      BETA RR 250 2006
      BETA RR 400 2009
      BETA RR 400 2008
      BETA RR 400 2007
      BETA RR 400 2006
      BETA RR 450 2009
      BETA RR 450 2008
      BETA RR 450 2007
      BETA RR 450 2006
      BETA RR 525 2009
      BETA RR 525 2008
      BETA RR 525 2007
      BETA RR 525 2006
      KTM EXC 250 2007
      KTM EXC 350 LC4 1994
      KTM EXC 400 LC4 1998
      KTM EXC 400 LC4 1997
      KTM EXC 400 LC4 1996
      KTM EXC 400 LC4 1995
      KTM EXC 400 LC4 1994
      KTM EXC 400 LC4 1993
      KTM EXC 400 RACING 1999
      KTM EXC 450 2007
      KTM EXC 450 RACING 2007
      KTM EXC 450 RACING 2006
      KTM EXC 450 RACING 2005
      KTM EXC 450 RACING 2004
      KTM EXC 450 RACING 2003
      KTM EXC 500 LC4 1991
      KTM EXC 500 LC4 1990
      KTM EXC 500 LC4 1989
      KTM EXC 520 2003
      KTM EXC 520 2002
      KTM EXC 520 2001
      KTM EXC 520 2000
      KTM EXC 520 RACING 2002
      KTM EXC 520 RACING 2001
      KTM EXC 520 RACING 2000
      KTM EXC 520 RACING 1999
      KTM EXC 525 RACING 2007
      KTM EXC 525 RACING 2006
      KTM EXC 525 RACING 2005
      KTM EXC 525 RACING 2004
      KTM EXC 525 RACING 2003
      KTM EXC-G 525 RACING 2006
      KTM EXC-G 525 RACING 2005
      KTM EXC-G 525 RACING 2004
      KTM EXC-G 525 RACING 2003
      KTM SMR 450 2007
      KTM SMR 450 2006
      KTM SMR 450 2005
      KTM SMR 450 2004
      KTM SMR 525 2005
      KTM SMR 525 2004
      KTM SMR 560 RACING 2007
      KTM SMR 560 RACING 2006
      KTM SX 450 2007
      KTM SX 450 2006
      KTM SX 450 RACING 2006
      KTM SX 450 RACING 2005
      KTM SX 450 RACING 2004
      KTM SX 450 RACING 2003
      KTM SX 500 1995
      KTM SX 500 1994
      KTM SX 500 1993
      KTM SX 520 2003
      KTM SX 520 2002
      KTM SX 520 2001
      KTM SX 520 2000
      KTM SX 520 RACING 2002
      KTM SX 520 RACING 2001
      KTM SX 520 RACING 2000
      KTM SX 525 2006
      KTM SX 525 2005
      KTM SX 525 2004
      KTM SX 525 2003
      KTM SX 525 RACING 2006
      KTM SX 525 RACING 2005
      KTM SX 525 RACING 2004
      KTM SX 525 RACING 2003
      KTM XC 450 ATV 2009
      KTM XC 450 ATV 2008
      KTM XC 525 ATV 2012
      KTM XC 525 ATV 2011
      KTM XC 525 ATV 2010
      KTM XC 525 ATV 2009
      KTM XC 525 ATV 2008
      POLARIS OUTLAW 450 MXR 2010
      POLARIS OUTLAW 450 MXR 2009
      POLARIS OUTLAW 525 2007
      POLARIS OUTLAW 525 IRS 2011
      POLARIS OUTLAW 525 IRS 2010
      POLARIS OUTLAW 525 IRS 2009
      POLARIS OUTLAW 525 IRS 2008
      POLARIS OUTLAW 525 S 2010
      POLARIS OUTLAW 525 S 2009
      POLARIS OUTLAW 525 S 2008

      PROX
      23.CBS64003
      11 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012
      PROX crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012
      PROX crankshaft bearing and seal kit for KTM EXC 400 LC4, BETA RR 400 and POLARIS OUTLAW 525 IRS from 1989 to 2012
      €131.90
      Tax Included