• New
    MOOSE RACING crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013
    MOOSE RACING crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013

    MOOSE RACING crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013

    Review (0)
    €159.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      MOOSE RACING offers this crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose MOOSE RACING?

      Moose Racing, the American brand founded by riders in 1986 and distributed by the LeMans group (Parts Unlimited, Parts Europe), covers all off-road bike maintenance.

      When should you replace the bearings on your GAS GAS EC 250?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Application: Crankshaft
      • Precision crankshaft bearings
      • Kit contains right and left crankshaft bearings; 2-stroke kits include the outer seals

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EC 200 2007
      GAS GAS EC 200 2006
      GAS GAS EC 200 2005
      GAS GAS EC 250 2013
      GAS GAS EC 250 2012
      GAS GAS EC 250 2011
      GAS GAS EC 250 2010
      GAS GAS EC 250 2009
      GAS GAS EC 250 2008
      GAS GAS EC 250 2007
      GAS GAS EC 250 2006
      GAS GAS EC 250 2005
      GAS GAS EC 250 2004
      GAS GAS EC 250 2003
      GAS GAS EC 250 RACING 2013
      GAS GAS EC 250 RACING 2012
      GAS GAS EC 250 RACING 2011
      GAS GAS EC 250 RACING 2010
      GAS GAS EC 250 RACING 2009
      GAS GAS EC 250 RACING 2008
      GAS GAS EC 300 2013
      GAS GAS EC 300 2012
      GAS GAS EC 300 2011
      GAS GAS EC 300 2010
      GAS GAS EC 300 2009
      GAS GAS EC 300 2008
      GAS GAS EC 300 2007
      GAS GAS EC 300 2006
      GAS GAS EC 300 2005
      GAS GAS EC 300 2004
      GAS GAS EC 300 2003
      GAS GAS EC 300 RACING 2013
      GAS GAS EC 300 RACING 2012
      GAS GAS EC 300 RACING 2011
      GAS GAS EC 300 RACING 2010
      GAS GAS EC 300 RACING 2009
      GAS GAS EC 300 RACING 2008
      GAS GAS MC 250 2009
      GAS GAS MC 250 2008
      GAS GAS MC 250 2007
      GAS GAS MC 250 2006
      GAS GAS MC 250 2005
      GAS GAS MC 250 2004
      GAS GAS MC 250 2003
      GAS GAS SM 250 2005
      GAS GAS SM 250 2004
      GAS GAS SM 250 2003

      MOOSE
      24-1115

      Specific References

      No customer reviews for the moment.

      Write your review
      MOOSE RACING crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013
      MOOSE RACING crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013
      MOOSE RACING crankshaft bearing and seal kit for GAS GAS EC 250, EC 250 RACING, EC 300, MC 250 from 2003 to 2013
      €159.90
      Tax Included