• New
    PROX crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023
    PROX crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023

    PROX crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023

    Review (0)
    €101.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The bearings and oil seals that support the crankshaft in the crankcase.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      PROX offers this crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023. The crankshaft spins on two large bearings in the cases, protected by oil seals. They take all the engine’s force; after many hours they develop play and vibration appears.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose PROX?

      ProX uses Koyo or NTN bearings, largely made in Japan in OEM factories, with the original internal clearance (C3 / C4).

      When should you replace the bearings on your BETA RR 350 EFI?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      Recommended hours for a bottom-end rebuild (manufacturer recommendation for the Beta RR four-stroke):

      • Normal use: every 90 h.
      • Racing: no Beta figure; have the wear checked at every top-end rebuild.

      Specifications and fitting tips

      • Application: Crankshaft
      • Built to exact OEM specifications for maximum performance and durability
      • Include all bearings/seals required to replace the component

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      BETA RR 350 2014
      BETA RR 350 2013
      BETA RR 350 2012
      BETA RR 350 2011
      BETA RR 350 EFI 2023
      BETA RR 350 EFI 2022
      BETA RR 350 EFI 2021
      BETA RR 350 EFI 2020
      BETA RR 350 EFI 2019
      BETA RR 350 EFI 2018
      BETA RR 350 EFI 2017
      BETA RR 350 EFI 2016
      BETA RR 350 EFI 2015
      BETA RR 390 2015
      BETA RR 390 EFI 2023
      BETA RR 390 EFI 2022
      BETA RR 390 EFI 2021
      BETA RR 390 EFI 2020
      BETA RR 390 EFI 2019
      BETA RR 390 EFI 2018
      BETA RR 390 EFI 2017
      BETA RR 390 EFI 2016
      BETA RR 400 2014
      BETA RR 400 2013
      BETA RR 400 2012
      BETA RR 400 2011
      BETA RR 400 2010
      BETA RR 430 2015
      BETA RR 430 EFI 2023
      BETA RR 430 EFI 2022
      BETA RR 430 EFI 2021
      BETA RR 430 EFI 2020
      BETA RR 430 EFI 2019
      BETA RR 430 EFI 2018
      BETA RR 430 EFI 2017
      BETA RR 430 EFI 2016
      BETA RR 450 2014
      BETA RR 450 2013
      BETA RR 450 2012
      BETA RR 450 2011
      BETA RR 450 2010
      BETA RR 480 2015
      BETA RR 480 EFI 2023
      BETA RR 480 EFI 2022
      BETA RR 480 EFI 2021
      BETA RR 480 EFI 2020
      BETA RR 480 EFI 2019
      BETA RR 480 EFI 2018
      BETA RR 480 EFI 2017
      BETA RR 480 EFI 2016
      BETA RR 498 2014
      BETA RR 498 2013
      BETA RR 498 2012
      BETA RR 520 2011
      BETA RR 520 2010

      PROX
      23.CBS73050
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023
      PROX crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023 -
      PROX crankshaft bearing and seal kit for BETA RR 350 EFI, RR 390 EFI, RR 400, RR 430 EFI, RR 450, RR 480 EFI from 2010 to 2023
      €101.90
      Tax Included