INNTECK Linkage Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 2005-2006

On TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 from 2005 to 2006, the INNTECK WY-27-1156 linkage bearing kit fits in place of the original part. The linkage bearing kit restores the pivots of the rear suspension: bearings, seals and sleeves, depending on the part number. A linkage that turns freely means a shock that works the way it should.

Specifications

• Brand: INNTECK
• Manufacturer part number: WY-27-1156

When to replace it?

• Play at the rear when you lift the rear wheel.
• Rear suspension that is harsh or squeaks.
• Rusty needles, marked sleeves or black grease when opened.

Take the linkage apart, clean it and grease it regularly, especially after rides in water or mud, and replace the bearings as soon as they bind or have play.

Fitting tips

1. Support the bike with the rear wheel off the ground and remove the linkage.
2. Press out the old bearings, or pull them out with a puller, without damaging the bores.
3. Press in the new bearings, straight, then fit the seals and the sleeves packed with waterproof grease.
4. Refit the linkage and tighten the pivot bolts to the manual's torque.

Spare parts and items to plan

• Swingarm bearings : ALL BALLS · INNTECK
• Grease : MOTUL 400 g

Frequently asked questions

Should I do the swingarm at the same time?
It is advisable: the swingarm bearings face the same conditions and are easy to do while you are in there.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
TM RACING EN 125 2006
TM RACING EN 125 2005
TM RACING EN 250 2006
TM RACING EN 250 2005
TM RACING EN 300 2006
TM RACING EN 300 2005
TM RACING MX 125 2006
TM RACING MX 125 2005
TM RACING MX 250 2006
TM RACING MX 250 2005
TM RACING MX 300 2006
TM RACING MX 300 2005