• New
    INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011
    INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011

    INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011

    Review (0)
    €86.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    INNTECK swingarm bearing kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 from 1996 to 2011.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    Wishlist
    Write your review

      The INNTECK WY-28-1183 swingarm bearing kit is designed for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 from 1996 to 2011. The swingarm pivots on its shaft on every movement of the rear suspension. Its bearings, often needle bearings, wear from water and mud: a swingarm pivot that binds or has play makes the rear end vague and wears out the drivetrain.

      Specifications

      • Brand: INNTECK
      • Manufacturer part number: WY-28-1183

      When to replace it?

      • Side play at the rear when you shake the wheel from left to right.
      • Pivot that binds when you move the swingarm up and down with the shock removed.
      • Rusty needles or marked sleeves when opened.

      Grease the pivot regularly and replace the bearings as soon as they have play or bind. While you are at it, check the linkage.

      Fitting tips

      1. Support the bike, then remove the rear wheel, the chain and the swingarm pivot shaft.
      2. Drive out the old bearings and sleeves and clean the bores.
      3. Press in the new ones, straight, with the seals and sleeves packed with waterproof grease.
      4. Refit the shaft and tighten to the manual's torque, then check that the swingarm pivots freely, with no play.

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      TM RACING EN 125 2007
      TM RACING EN 125 2006
      TM RACING EN 125 2005
      TM RACING EN 125 2004
      TM RACING EN 125 2003
      TM RACING EN 125 2002
      TM RACING EN 125 1997
      TM RACING EN 125 1996
      TM RACING EN 250 2007
      TM RACING EN 250 2006
      TM RACING EN 250 2005
      TM RACING EN 250 2004
      TM RACING EN 250 2003
      TM RACING EN 250 2002
      TM RACING EN 300 2007
      TM RACING EN 300 2006
      TM RACING EN 300 2005
      TM RACING MX 125 2011
      TM RACING MX 125 2010
      TM RACING MX 125 2009
      TM RACING MX 125 2008
      TM RACING MX 125 2007
      TM RACING MX 125 2006
      TM RACING MX 125 2005
      TM RACING MX 125 2004
      TM RACING MX 125 2003
      TM RACING MX 125 2002
      TM RACING MX 125 1997
      TM RACING MX 125 1996
      TM RACING MX 250 2007
      TM RACING MX 250 2006
      TM RACING MX 250 2005
      TM RACING MX 250 2004
      TM RACING MX 250 2003
      TM RACING MX 250 2002
      TM RACING MX 250 1997
      TM RACING MX 250 1996
      TM RACING MX 300 2007
      TM RACING MX 300 2006
      TM RACING MX 300 2005

      INNTECK
      WY-28-1183
      5 Items

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011
      INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011
      INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011
      INNTECK Swingarm Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 1996-2011
      €86.90
      Tax Included