INNTECK Chain Guide - Black for YAMAHA YZ 85 2002-2018

On YAMAHA YZ 85 from 2002 to 2018, the INNTECK CG6001 chain guide fits in place of the original part. Sitting just in front of the rear sprocket, the chain guide channels the lower run of the chain. Off-road, it's a safety part: it keeps the chain from derailing and protects the sprocket from impacts.

Specifications

• Brand: INNTECK
• Manufacturer part number: CG6001
• Engine: 2-stroke

When to replace it?

• Wear pad grooved by the chain, almost worn through or cracked.
• Guide bent or broken after an impact.
• Chain rubbing on the side plates instead of running through the centre.

Check it every time you wash the bike: a pad worn down to the metal wears the chain, and a bent guide can throw the chain off.

Fitting tips

1. Remove the old guide and clean the mounting points on the swingarm.
2. Offer up the new guide and check that the chain runs through the centre without touching the side plates.
3. Tighten the bolts to the manufacturer's torque, with medium-strength threadlocker.
4. Spin the wheel to check the alignment, then set the chain tension.

Spare parts and items to plan

• Drive chain : RENTHAL 428 · AFAM
• Rear sprocket : RFX · JT SPROCKETS

Frequently asked questions

Can the wear pad be replaced?
On two-piece guides, yes: you just change the pad when it's worn.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YZ 85 2018
YAMAHA YZ 85 2017
YAMAHA YZ 85 2016
YAMAHA YZ 85 2015
YAMAHA YZ 85 2014
YAMAHA YZ 85 2013
YAMAHA YZ 85 2012
YAMAHA YZ 85 2011
YAMAHA YZ 85 2010
YAMAHA YZ 85 2009
YAMAHA YZ 85 2008
YAMAHA YZ 85 2007
YAMAHA YZ 85 2006
YAMAHA YZ 85 2005
YAMAHA YZ 85 2004
YAMAHA YZ 85 2003
YAMAHA YZ 85 2002