• New
    INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014
    INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014

    INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014

    Review (0)
    €83.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    INNTECK timing chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 from 2010 to 2014.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    Wishlist
    Write your review

      The INNTECK CD1015 timing chain is designed for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 from 2010 to 2014. The timing chain drives the camshafts from the crankshaft and keeps the valves in sync with the piston. As it stretches, it throws the valve timing out and pushes the tensioner to the end of its travel.

      Specifications

      • Brand: INNTECK
      • Manufacturer part number: CD1015
      • Engine: 4-stroke

      When to replace it?

      • Rattling or chain noise on the timing side, especially at idle.
      • Tensioner at the end of its travel.
      • Timing marks that no longer line up.

      At the intervals in the service manual, and as soon as the tensioner reaches the end of its travel. Check the sprockets and the guides at the same time.

      Fitting tips

      1. Set the engine at top dead centre on the compression stroke, marks aligned, before removing anything.
      2. On most motocross engines the chain is endless, with no master link: replacing it means removing the crankshaft sprocket or a camshaft, as described in the manual.
      3. Line the camshafts up with their timing marks again, then put the tensioner back under tension.
      4. Turn the engine over two full turns by hand and check the timing again before starting.
      5. Refit with a valve cover gasket in good condition.

      Spare parts and items to plan

      Frequently asked questions

      Should I replace the tensioner?
      Check it: a worn tensioner, or one at the end of its travel, must be replaced along with the chain.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      BETA RR 400 2014
      BETA RR 400 2013
      BETA RR 400 2012
      BETA RR 400 2011
      BETA RR 400 2010
      BETA RR 450 2014
      BETA RR 450 2013
      BETA RR 450 2012
      BETA RR 450 2011
      BETA RR 450 2010
      BETA RR 498 2014
      BETA RR 498 2013
      BETA RR 498 2012
      BETA RR 520 2011
      BETA RR 520 2010
      BETA RS 400 2014
      BETA RS 400 2013
      BETA RS 450 2014
      BETA RS 450 2013
      BETA RS 520 2014
      BETA RS 520 2013
      TM RACING MX 250 2012
      TM RACING MX 250 2011

      INNTECK
      CD1015
      5 Items

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014
      INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014
      INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014
      INNTECK Timing Chain for BETA RR 400, RR 450, RR 498, RR 520, RS 400, RS 450, RS 520 and TM RACING MX 250 2010-2014
      €83.90
      Tax Included