MOTION PRO T3 Slidelight Clutch Cable for YAMAHA WRF 250 2003-2013

The MOTION PRO T3 Slidelight 05-3003 clutch cable is designed for YAMAHA WRF 250 from 2003 to 2013. The clutch cable transmits the effort from the lever to the clutch. Off-road, it gets worked hard: a new cable makes the lever light and the engagement point consistent, and won't let you down in the middle of a ride.

Specifications

• Brand: MOTION PRO
• Manufacturer part number: 05-3003
• T3 Slidelight housing with low-friction liner
• Engine: 4-stroke

When to replace it?

• Lever that gets heavy or snags.
• Frayed strands near the end fitting, damaged outer sheath.
• Engagement point that changes from one ride to the next.

Replace it at the first broken strand: a snapped cable leaves you with no clutch.

Fitting tips

1. Slacken the adjuster and unhook the old cable at both ends.
2. Route the new cable the same way, with no tight bends.
3. Grease the ends with a suitable grease.
4. Set the lever free play as per the manual.

Why MOTION PRO?

For its T3 Slidelight cables, Motion Pro measured in-house that a conventional cable housing can wear through to metal-on-metal contact in fewer than 1,200 cycles, whereas its own inner liner lasts 30,000 cycles with minimal wear. With anodised billet aluminium end fittings and a built-in lubricator, the control stays light and smooth over time.

Spare parts and items to plan

• Brake and clutch levers : SCAR · MOTION
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA WRF 250 2013
YAMAHA WRF 250 2012
YAMAHA WRF 250 2011
YAMAHA WRF 250 2010
YAMAHA WRF 250 2009
YAMAHA WRF 250 2008
YAMAHA WRF 250 2007
YAMAHA WRF 250 2006
YAMAHA WRF 250 2005
YAMAHA WRF 250 2004
YAMAHA WRF 250 2003