- New
ALL BALLS Swing Arm Bearing Kit for YAMAHA WR 250, WRF 400, YZ 125, YZ 250, YZF 400 1998
€92.90
Tax Included
The bearings that let the swingarm pivot freely so the rear suspension works properly.
ALL BALLS offers this swingarm bearing kit for YAMAHA WR 250, WRF 400, YZ 125, YZ 250, YZF 400 1998. The swingarm pivots on needle bearings protected by seals. Water and mud make them seize: the suspension gets stiff and play appears.
What is this bearing made of?
Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.
- Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
- Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
- Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.
Why choose ALL BALLS?
Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.
When should you replace this part?
Side play when you rock the swingarm with the rear wheel removed, or a notchy movement: the bearings need changing.
Specifications and fitting tips
- Swing arm bearing kit
- For a high quality renewing
- Manufacturer part number: 28-1076
Cross-Mania tip: Press out the old bearings, grease the new ones and check the swingarm pivot: if it is marked, replace it too.
Also needed with this part
- Grease : SHOWA 500 g · KYB
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA WR 250 1998
YAMAHA WRF 400 1998
YAMAHA YZ 125 1998
YAMAHA YZ 250 1998
YAMAHA YZF 400 1998
28-1076
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The bearings that let the swingarm pivot freely so the rear suspension works properly.
ALL BALLS Swing Arm Bearing Kit for YAMAHA WR 250, WRF 400, YZ 125, YZ 250, YZF 400 1998
€92.90
Tax Included