- New
FACTORY LINKS Wheel Bearing Kit for HONDA ATC 110, ATC 125 M, ATC 200 S, ATC 200 X, ATC 250 1981-1987
€23.90
Tax Included
The bearing that lets the wheel spin freely on its axle.
FACTORY LINKS offers this wheel bearing for HONDA ATC 110, ATC 125 M, ATC 200 S, ATC 200 X, ATC 250 1981-1987. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.
What is this bearing made of?
Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.
- Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
- Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
- Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.
Why choose FACTORY LINKS?
Factory Links, founded in 2014 by Pierre Mege between Auvergne (France) and Virginia (USA), supplies original equipment to Sherco and Electric Motion and is the official bearing and linkage partner of the FIM Hard Enduro World Championship (2026-2028).
When should you replace the bearings on your HONDA ATC 250?
Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.
Specifications and fitting tips
- Manufacturer part number: AFW-H-002
Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.
Also needed with this part
- Grease : MOTUL 400 g 108661 · MOTUL 400 g 3043059
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
HONDA ATC 110 1985
HONDA ATC 110 1984
HONDA ATC 110 1983
HONDA ATC 110 1982
HONDA ATC 125 M 1987
HONDA ATC 125 M 1986
HONDA ATC 125 M 1985
HONDA ATC 125 M 1984
HONDA ATC 200 1984
HONDA ATC 200 S 1986
HONDA ATC 200 S 1985
HONDA ATC 200 S 1984
HONDA ATC 200 X 1987
HONDA ATC 200 X 1986
HONDA ATC 200 X 1985
HONDA ATC 200 X 1984
HONDA ATC 200 X 1983
HONDA ATC 250 1987
HONDA ATC 250 1986
HONDA ATC 250 1985
HONDA ATC 250 1984
HONDA ATC 250 1983
HONDA ATC 250 1982
HONDA ATC 250 1981
HONDA ATC 350 X 1986
HONDA ATC 350 X 1985
AFW-H-002
12 Items
Specific References
No customer reviews for the moment.
The bearing that lets the wheel spin freely on its axle.
FACTORY LINKS Wheel Bearing Kit for HONDA ATC 110, ATC 125 M, ATC 200 S, ATC 200 X, ATC 250 1981-1987
€23.90
Tax Included