PROX Rear Wheel Bearing Kit for KTM, HUSQVARNA, GAS GAS and HUSABERG 1993-2027

Name: PROX Rear Wheel Bearing Kit for KTM, HUSQVARNA, GAS GAS and HUSABERG 1993-2027
Brand: PROX
SKU: 23.S112073
Price: 26.9 EUR
Availability: InStock

Review (0)

€26.90

Tax Included

Supplier stock, shipped within 2 to 5 days.

PROX wheel bearing kit for KTM EXC, EXCF, FREERIDE, SX, SXF, XCF, XCW 105, 125, 144, 150, 200, 250, 300, 350, 360, 380, 400, 450, 500, 505, 520, 525, 530, HUSQVARNA FC, FE, FS, FX, TC, TE, TX 85, 125, 150, 250, 300, 350, 450, 501, GAS GAS EC, ECF, EX, EXF, MC, MCF 85, 125, 250, 300, 350, 450, 500 and HUSABERG FE, FX, TE 125, 250, 300, 350, 390, 450, 501, 550, 570, 650 from 1993 to 2027.

The PROX 23.S112073 wheel bearing kit is designed for KTM EXC 125, EXC 150, EXC 200, EXC 250, EXC 300, EXC 360, EXC 380, EXC 400, EXC 450, EXC 500, EXC 520, EXC 525, EXC 530, EXCF 250, EXCF 350, EXCF 450, EXCF 500, FREERIDE 250, FREERIDE 350, SX 105, SX 125, SX 144, SX 150, SX 200, SX 250, SX 360, SX 380, SX 400, SX 450, SX 520, SX 525, SXF 250, SXF 350, SXF 450, SXF 505, XCF 505, XCW 125, XCW 150, HUSQVARNA FC 250, FC 350, FC 450, FE 250, FE 350, FE 450, FE 501, FS 450, FX 350, FX 450, TC 85, TC 125, TC 250, TE 125, TE 150, TE 250, TE 300, TX 125, TX 300, GAS GAS EC 250, EC 300, ECF 250, ECF 350, ECF 500, EX 250, EX 300, EXF 250, EXF 350, EXF 450, MC 85, MC 125, MC 250, MCF 250, MCF 350, MCF 450 and HUSABERG FE 250, FE 350, FE 390, FE 450, FE 501, FE 550, FE 570, FE 650, FX 450, TE 125, TE 250, TE 300 from 1993 to 2027. Wheel bearings carry the whole weight of the bike and take every landing, in mud, water and sand. When they develop play or feel notchy, the wheel wobbles, the disc rubs on the pads and the bike holds its line less well.

Specifications

Brand: PROX
Manufacturer part number: 23.S112073

When to replace it?

Wheel play: with the bike on a stand, grab the wheel at the top and bottom and rock it.
With the axle out, bearings that turn with tight spots or a grinding noise.
Brake disc rubbing on and off against the pads.
Hub seals hardened or torn, rust around the axle.

Check the wheels for play after every pressure wash or ride through water, and replace the bearings at the slightest play or tight spot. Always change all the bearings in a wheel at the same time, together with their seals: a new bearing fitted next to a worn one won't last.

Fitting tips

Remove the wheel, then the side spacers and the hub seals.
Drive the bearings out with an expanding bearing puller, or from inside the hub by pushing the centre spacer aside and tapping alternately on each side of the inner race.
Clean the hub, warm it slightly (around 80 °C, with a heat gun) and fit the new bearings, pressing only on the outer race.
Put the centre spacer back between the bearings, then fit new seals packed with waterproof grease.
Refit the wheel, torque the axle to the figure in the manual and check that the wheel spins freely, with no play.

Why PROX?

ProX Racing Parts has been supplying off-road riders since 1975 from its headquarters near Amsterdam. Beyond the engine and clutch, its catalogue covers chassis wear parts: wheel bearings, seals and spacers.

Spare parts and items to plan

Grease : MOTUL 400 g
Wheel seals : ATHENA · SKF
Wheel spacers : RFX FXWS5050199OR · RFX FXWS5050099OR

Frequently asked questions

Should I change the bearings on both sides?
Yes: replace all the bearings in the wheel together, they have the same amount of wear. It's also the moment to fit new wheel seals.

What is the centre spacer for?
It keeps the bearings the right distance apart when you tighten the axle. If it's left out or badly positioned, the bearings get crushed sideways and only last a few hours.

Why do my bearings wear out so fast?
A pressure-washer jet aimed at the hub, worn seals or scored spacers let water in. Change the seals along with the bearings and avoid aiming at the hubs when you wash the bike.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Reference 23.S112073

In stock15 Items

Specific References

Click on your bike to see all compatible parts.

Write your review

No customer reviews for the moment.

PROX Rear Wheel Bearing Kit for KTM, HUSQVARNA, GAS GAS and HUSABERG 1993-2027

€26.90

Tax Included


PHP_SESSID	cross-mania.com	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	.cross-mania.com	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours

Shopping Cart

PROX Rear Wheel Bearing Kit for KTM, HUSQVARNA, GAS GAS and HUSABERG 1993-2027

Specifications

When to replace it?

Fitting tips

Why PROX?

Spare parts and items to plan

Frequently asked questions

Compatibility

PROX Rear Wheel Bearing Kit for KTM, HUSQVARNA, GAS GAS and HUSABERG 1993-2027