• New
    PIVOT WORKS Front Wheel Bearings And Seals Kit for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD MANUAL TRANS. 1998-2017
    PIVOT WORKS Front Wheel Bearings And Seals Kit for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD MANUAL TRANS. 1998-2017

    PIVOT WORKS Front Wheel Bearings And Seals Kit for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD MANUAL TRANS. 1998-2017

    Review (0)
    €83.90
    Tax Included
    Last items in stock

    The bearing that lets the wheel spin freely on its axle.

    Quantity :
    In stock

    Last items in stock

      PIVOT WORKS offers this wheel bearing for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD AUTO TRANS. FIS, 500 4WD MANUAL TRANS., 500 4WD MANUAL TRANS. FIS 1998-2017. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

      What is this bearing made of?

      Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

      • Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
      • Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
      • Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

      Why choose PIVOT WORKS?

      Pivot Works kits, sold by the American All Balls Racing group, use hardened NTN, NSK or Koyo bearings from original-equipment bearing suppliers, supplied pre-greased with their seals; every kit carries the Pivot Works limited lifetime warranty.

      When should you replace the bearings on your ARCTIC CAT 500 4WD AUTO TRANS.?

      Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

      Specifications and fitting tips

      • Manufacturer part number: PWFWK-A01-542

      Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      ARCTIC CAT 500 4WD AUTO TRANS. 2017
      ARCTIC CAT 500 4WD AUTO TRANS. 2016
      ARCTIC CAT 500 4WD AUTO TRANS. 2015
      ARCTIC CAT 500 4WD AUTO TRANS. 2014
      ARCTIC CAT 500 4WD AUTO TRANS. 2013
      ARCTIC CAT 500 4WD AUTO TRANS. 2002
      ARCTIC CAT 500 4WD AUTO TRANS. 2001
      ARCTIC CAT 500 4WD AUTO TRANS. 2000
      ARCTIC CAT 500 4WD AUTO TRANS. FIS 2004
      ARCTIC CAT 500 4WD AUTO TRANS. FIS 2003
      ARCTIC CAT 500 4WD MANUAL TRANS. 2002
      ARCTIC CAT 500 4WD MANUAL TRANS. 2001
      ARCTIC CAT 500 4WD MANUAL TRANS. 2000
      ARCTIC CAT 500 4WD MANUAL TRANS. 1999
      ARCTIC CAT 500 4WD MANUAL TRANS. 1998
      ARCTIC CAT 500 4WD MANUAL TRANS. FIS 2004
      ARCTIC CAT 500 4WD MANUAL TRANS. FIS 2003
      ARCTIC CAT 500 4WD MANUAL TRANS. FIS 2002

      PIVOT WORKS
      PWFWK-A01-542
      1 Item

      Specific References

      No customer reviews for the moment.

      Write your review
      PIVOT WORKS Front Wheel Bearings And Seals Kit for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD MANUAL TRANS. 1998-2017
      PIVOT WORKS Front Wheel Bearings And Seals Kit for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD MANUAL TRANS. 1998-2017
      PIVOT WORKS Front Wheel Bearings And Seals Kit for ARCTIC CAT 500 4WD AUTO TRANS., 500 4WD MANUAL TRANS. 1998-2017
      €83.90
      Tax Included