PIVOT WORKS Rear Wheel Bearings And Seals Kit for HONDA CRF 230, CRF 230 L, XLR 125, XR 125 L, XR 400 and YAMAHA XT 600

PIVOT WORKS offers this wheel bearing for HONDA CRF 230, CRF 230 L, XLR 125, XR 125 L, XR 400 and YAMAHA XT 600 1990-2011. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

What is this bearing made of?

Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

• Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
• Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
• Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

When should you replace the bearings?

Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

Specifications and fitting tips

• Manufacturer part number: PWRWK-H14-040

Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

Also needed with this part

• Grease : SHOWA 500 g · KAYABA

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CRF 230 2009
HONDA CRF 230 2008
HONDA CRF 230 L 2009
HONDA CRF 230 L 2008
HONDA XLR 125 1998
HONDA XR 125 L 2010
HONDA XR 125 L 2009
HONDA XR 125 L 2008
HONDA XR 125 L 2007
HONDA XR 125 L 2006
HONDA XR 125 L 2005
HONDA XR 125 L 2004
HONDA XR 125 LEK 2011
HONDA XR 400 2004
HONDA XR 400 2003
HONDA XR 400 2002
HONDA XR 400 2001
HONDA XR 400 2000
HONDA XR 400 1999
HONDA XR 400 1998
HONDA XR 400 1997
HONDA XR 400 1996
YAMAHA XT 600 1990