FACTORY LINKS Wheel Bearing Kit for KTM SX 85, GAS GAS MC 85 and HUSQVARNA TC 85 2012-2025

FACTORY LINKS offers this wheel bearing for KTM SX 85, GAS GAS MC 85 and HUSQVARNA TC 85 2012-2025. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

What is this bearing made of?

Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

• Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
• Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
• Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

When should you replace the bearings?

Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

Specifications and fitting tips

• Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions.
• Manufacturer part number: FWK-T-029

Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

Also needed with this part

• Grease : SHOWA 500 g · KAYABA

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
GAS GAS MC 85 2025
GAS GAS MC 85 2024
GAS GAS MC 85 2023
GAS GAS MC 85 2022
GAS GAS MC 85 2021
HUSQVARNA TC 85 2024
HUSQVARNA TC 85 2023
HUSQVARNA TC 85 2022
KTM SX 85 2024
KTM SX 85 2023
KTM SX 85 2022
KTM SX 85 2021
KTM SX 85 2020
KTM SX 85 2019
KTM SX 85 2018
KTM SX 85 2017
KTM SX 85 2016
KTM SX 85 2015
KTM SX 85 2014
KTM SX 85 2013
KTM SX 85 2012