HOT RODS Water pump repair kit - BANSHEE for YAMAHA YFZ 350 BANSHEE 2WD 1988-2006

HOT RODS offers this water pump repair kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2006. The water pump moves coolant between the engine and radiators. Its shaft turns constantly and its seals wear: coolant eventually leaks, often from the small weep hole under the pump.

Why rebuild the water pump?

The benefits:

• Stop a coolant leak.
• Prevent engine overheating.
• Much cheaper than a complete pump.

Why choose HOT RODS?

Hot Rods, the bottom-end specialist since 1993: crankshafts, rods, bearings and seals for a complete rebuild.

When should you replace the water pump on your YAMAHA YFZ 350 BANSHEE 2WD?

Check the weep hole under the pump and the coolant level regularly. A pump bearing with play quickly wears new seals, so replace them together.

Specifications and fitting tips

• Manufacturer part number: WPK0026

Cross-Mania tip: Drain the system before working on it, refill with fresh coolant and bleed the air.

Also needed with this part

• Coolant : MOTUL 20 L · MOTUL 500 ml

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFZ 350 BANSHEE 2WD 2006
YAMAHA YFZ 350 BANSHEE 2WD 2005
YAMAHA YFZ 350 BANSHEE 2WD 2004
YAMAHA YFZ 350 BANSHEE 2WD 2003
YAMAHA YFZ 350 BANSHEE 2WD 2002
YAMAHA YFZ 350 BANSHEE 2WD 2001
YAMAHA YFZ 350 BANSHEE 2WD 2000
YAMAHA YFZ 350 BANSHEE 2WD 1999
YAMAHA YFZ 350 BANSHEE 2WD 1998
YAMAHA YFZ 350 BANSHEE 2WD 1997
YAMAHA YFZ 350 BANSHEE 2WD 1996
YAMAHA YFZ 350 BANSHEE 2WD 1995
YAMAHA YFZ 350 BANSHEE 2WD 1994
YAMAHA YFZ 350 BANSHEE 2WD 1993
YAMAHA YFZ 350 BANSHEE 2WD 1992
YAMAHA YFZ 350 BANSHEE 2WD 1991
YAMAHA YFZ 350 BANSHEE 2WD 1990
YAMAHA YFZ 350 BANSHEE 2WD 1989
YAMAHA YFZ 350 BANSHEE 2WD 1988