• New
    BOYESEN Rad Valve Intake Boot for YAMAHA WR, YZ 125, 250, KAWASAKI KX 125, SUZUKI RM 250 and HONDA CR 125, 250 1984-2018
    BOYESEN Rad Valve Intake Boot for YAMAHA WR, YZ 125, 250, KAWASAKI KX 125, SUZUKI RM 250 and HONDA CR 125, 250 1984-2018

    BOYESEN Rad Valve Intake Boot for YAMAHA WR, YZ 125, 250, KAWASAKI KX 125, SUZUKI RM 250 and HONDA CR 125, 250 1984-2018

    Review (0)
    €28.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    BOYESEN Rad Valve intake boot for YAMAHA WR 250, YZ 125, YZ 250, HONDA CR 125, CR 250, KAWASAKI KX 125 and SUZUKI RM 250 from 1984 to 2018.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      The BOYESEN BOYRB-2 Rad Valve intake boot is designed for YAMAHA WR 250, YZ 125, YZ 250, HONDA CR 125, CR 250, KAWASAKI KX 125 and SUZUKI RM 250 from 1984 to 2018. Over time and with heat, the intake boot hardens and cracks. Replacing it guarantees a tight seal between the carburettor and the reed valve block, which is essential for consistent carburation.

      Specifications

      • Brand: BOYESEN
      • Manufacturer part number: BOYRB-2
      • EAN code: 804429503797
      • Weight: 300 g
      • Engine: 2-stroke

      When to replace it?

      • Boot hardened, cracked or distorted.
      • Unstable idle or hanging revs: possible air leak.
      • Carburettor moving in the boot even with the clamp tight.

      Check the boot every time you remove the carburettor or the reed valve block. Check the model and model years: it must match your Rad Valve reed block.

      Fitting tips

      1. Remove the carburettor, then the boot to be replaced.
      2. Clean the mating surfaces and fit the new boot with a new reed block gasket.
      3. Tighten the bolts in a criss-cross pattern to the specified torque, then push the carburettor fully into the boot and tighten its clamp.
      4. Start the engine and check that it holds a steady idle.

      Why BOYESEN?

      Boyesen is an American brand specialising in the intake and the engine covers of two-stroke engines: reed petals, RAD Valve reed blocks, engine covers and Supercooler water pumps.

      Spare parts and items to plan

      Frequently asked questions

      Will this boot fit without a Rad Valve block?
      It's designed for a Boyesen Rad Valve reed block: check compatibility with your bike.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA CR 125 2003
      HONDA CR 125 2002
      HONDA CR 250 2001
      KAWASAKI KX 125 2005
      KAWASAKI KX 125 2004
      KAWASAKI KX 125 2003
      KAWASAKI KX 125 2002
      SUZUKI RM 250 1993
      SUZUKI RM 250 1992
      SUZUKI RM 250 1991
      SUZUKI RM 250 1990
      YAMAHA WR 250 1991
      YAMAHA WR 250 1990
      YAMAHA WR 250 1989
      YAMAHA YZ 125 2018
      YAMAHA YZ 125 2017
      YAMAHA YZ 125 2016
      YAMAHA YZ 125 2015
      YAMAHA YZ 125 2014
      YAMAHA YZ 125 2013
      YAMAHA YZ 125 2012
      YAMAHA YZ 125 2011
      YAMAHA YZ 125 2010
      YAMAHA YZ 125 2009
      YAMAHA YZ 125 2008
      YAMAHA YZ 125 2007
      YAMAHA YZ 125 2006
      YAMAHA YZ 125 2005
      YAMAHA YZ 125 2004
      YAMAHA YZ 125 2003
      YAMAHA YZ 125 2002
      YAMAHA YZ 125 2001
      YAMAHA YZ 125 2000
      YAMAHA YZ 125 1999
      YAMAHA YZ 250 1989
      YAMAHA YZ 250 1988
      YAMAHA YZ 250 1987
      YAMAHA YZ 250 1986
      YAMAHA YZ 250 1985
      YAMAHA YZ 250 1984

      BOYESEN
      BOYRB-2
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      BOYESEN Rad Valve Intake Boot for YAMAHA WR, YZ 125, 250, KAWASAKI KX 125, SUZUKI RM 250 and HONDA CR 125, 250 1984-2018
      BOYESEN Rad Valve Intake Boot for YAMAHA WR, YZ 125, 250, KAWASAKI KX 125, SUZUKI RM 250 and HONDA CR 125, 250 1984-2018
      BOYESEN Rad Valve Intake Boot for YAMAHA WR, YZ 125, 250, KAWASAKI KX 125, SUZUKI RM 250 and HONDA CR 125, 250 1984-2018
      €28.90
      Tax Included