- New
ATHENA Cylinder Base Gasket for SUZUKI RM 50, RM 80, TS 50, TS 80 1977-1991
€3.50
Tax Included
The gasket fitted between the crankcase and the cylinder: it seals the joint and sets the cylinder height.
ATHENA offers this cylinder base gasket for SUZUKI RM 50, RM 80, TS 50, TS 80 1977-1991. The base gasket sits under the cylinder, on the crankcase. Crushed when tightened, it cannot be reused: replace it every time the cylinder comes off.
Why does the thickness matter?
The benefits:
- The OE thickness keeps the cylinder height intended by the manufacturer.
- Another thickness lets you correct piston-to-head clearance after machining or adjust the port timing of a 2-stroke.
- A new gasket keeps the bottom end sealed against oil and gases.
Why choose ATHENA?
Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.
When should you replace the base gasket on your SUZUKI TS 50?
Every time the cylinder comes off: piston change, top-end rebuild or cylinder inspection. Oil or mixture seeping at the base of the cylinder also points to a tired gasket.
No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 15 h of hard use and every 30 h of leisure riding.
Specifications and fitting tips
- Thickness : OE
- Manufacturer part number: S410510006014
Cross-Mania tip: Choose the OE thickness if the cylinder and head have not been machined; if in doubt, measure the squish with solder wire before final assembly.
Spare parts and items to plan
- Top-end gasket kit : CENTAURO · ATHENA
- Piston : VERTEX · WOSSNER
- Piston rings : VERTEX · WOSSNER
- Coolant : LIQUI MOLY 1 L · TWIN AIR
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
SUZUKI RM 50 1981
SUZUKI RM 50 1980
SUZUKI RM 50 1979
SUZUKI RM 50 1978
SUZUKI RM 80 1981
SUZUKI RM 80 1980
SUZUKI RM 80 1979
SUZUKI RM 80 1978
SUZUKI TS 50 1991
SUZUKI TS 50 1990
SUZUKI TS 50 1989
SUZUKI TS 50 1988
SUZUKI TS 50 1987
SUZUKI TS 50 1986
SUZUKI TS 50 1985
SUZUKI TS 50 1984
SUZUKI TS 50 1983
SUZUKI TS 50 1982
SUZUKI TS 50 1981
SUZUKI TS 50 1980
SUZUKI TS 50 1979
SUZUKI TS 50 1978
SUZUKI TS 50 1977
SUZUKI TS 80 1983
SUZUKI TS 80 1982
SUZUKI TS 80 1981
S410510006014
9 Items
Specific References
Click on your bike to see all compatible parts.
- SUZUKI RM 50 1978
- SUZUKI RM 50 1979
- SUZUKI RM 50 1980
- SUZUKI RM 50 1981
- SUZUKI RM 80 1978
- SUZUKI RM 80 1979
- SUZUKI RM 80 1980
- SUZUKI RM 80 1981
- SUZUKI TS 50 1977
- SUZUKI TS 50 1978
- SUZUKI TS 50 1979
- SUZUKI TS 50 1980
- SUZUKI TS 50 1981
- SUZUKI TS 50 1982
- SUZUKI TS 50 1983
- SUZUKI TS 50 1984
- SUZUKI TS 50 1985
- SUZUKI TS 50 1986
- SUZUKI TS 50 1987
- SUZUKI TS 50 1988
- SUZUKI TS 50 1989
- SUZUKI TS 50 1990
- SUZUKI TS 50 1991
- SUZUKI TS 80 1981
- SUZUKI TS 80 1982
- SUZUKI TS 80 1983
No customer reviews for the moment.
The gasket fitted between the crankcase and the cylinder: it seals the joint and sets the cylinder height.
ATHENA Cylinder Base Gasket for SUZUKI RM 50, RM 80, TS 50, TS 80 1977-1991
€3.50
Tax Included