ATHENA Cylinder Head Gasket for HUSQVARNA TC 250, TE 250, TXC 250 2003-2004

ATHENA offers this cylinder head gasket for HUSQVARNA TC 250, TE 250, TXC 250 2003-2004. The head gasket takes the pressure and heat of every combustion. It is crushed when the head is torqued down and must be replaced every time the head comes off.

Why replace this gasket every time it is removed?

The benefits:

• A new gasket guarantees a perfectly sealed joint.
• Material designed to withstand heat, oil and coolant.
• An inexpensive part that saves doing the job twice.

Why choose ATHENA?

Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

When should you replace the head gasket on your HUSQVARNA TC 250?

Loss of compression, a dropping coolant level, bubbles in the radiator or traces between cylinder and head: the gasket needs changing. It is also replaced every time the head comes off.

No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 20 h of hard use and every 40 h of leisure riding.

Specifications and fitting tips

• Manufacturer part numbers: S410220001008 (OE), S410220001007 (1.10 mm), S410220001006 (1.20 mm)

Choose the thickness from the list. "OE" is the factory thickness; another thickness is used to set the cylinder height after a rebuild (piston-to-head clearance, port timing on a 2-stroke).

Spare parts and items to plan

• Top-end gasket kit : MOOSE · COMETIC
• Piston : METEOR · VERTEX
• Coolant : LIQUI MOLY 1 L · TWIN AIR
• Spark plug : NGK 3521 · NGK 6955

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA TC 250 2004
HUSQVARNA TC 250 2003
HUSQVARNA TE 250 2004
HUSQVARNA TE 250 2003
HUSQVARNA TXC 250 2004
HUSQVARNA TXC 250 2003