KENDA Rim Tape Ø 20''- 21'' - 22 mm

KENDA offers this rim strip. The rim strip covers the spoke nipples and the edges of the holes inside the rim, where the inner tube sits.

Why replace the rim strip?

The benefits:

• An inner tube protected from the spoke nipples and the edges of the rim holes.
• An inexpensive part to change at the same time as the tyre or tube.
• Depending on the model, with or without a valve hole, in the width of your rim.

Why choose KENDA?

KENDA is a Taiwanese manufacturer of tyres and inner tubes.

When should you replace this part?

A rim strip that is cut, hardened, out of place or shows a spoke nipple: replace it, ideally at every tube change.

Specifications and fitting tips

• Manufacturer part number: YR222000

Cross-Mania tip: Replace it at every tube change if it is cut or out of place.

Also needed with this part

• Inner tube : MICHELIN · KENDA
• Tyre fitting and repair : KITE 20.761.0.BL · KITE 20.762.0.BL

Compatibility

Choose the same size as the original tyre: it is moulded on the sidewall of your current tyre and given in the bike's manual.