ALL BALLS Swing Arm Bearing Kit for HONDA CRF 250, CRF 450, CRF 450 L, CRF 450 RX ENDURO, CRF 450 X 2017-2026

ALL BALLS offers this swingarm bearing kit for HONDA CRF 250, CRF 450, CRF 450 L, CRF 450 RX ENDURO, CRF 450 X 2017-2026. The swingarm pivots on needle bearings protected by seals. Water and mud make them seize: the suspension gets stiff and play appears.

What is this bearing made of?

Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

• Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
• Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
• Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

Why choose ALL BALLS?

Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.

When should you replace this part?

Side play when you rock the swingarm with the rear wheel removed, or a notchy movement: the bearings need changing.

Specifications and fitting tips

• Swing arm bearing kit
• For a high quality renewing
• Manufacturer part number: 28-1218

Cross-Mania tip: Press out the old bearings, grease the new ones and check the swingarm pivot: if it is marked, replace it too.

Also needed with this part

• Grease : MOTUL 400 g 108664 · MOTUL 400 g 108672

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CRF 250 2019
HONDA CRF 250 2018
HONDA CRF 250 RX ENDURO 2019
HONDA CRF 450 2018
HONDA CRF 450 2017
HONDA CRF 450 L 2020
HONDA CRF 450 L 2019
HONDA CRF 450 RX ENDURO 2018
HONDA CRF 450 RX ENDURO 2017
HONDA CRF 450 X 2026
HONDA CRF 450 X 2025
HONDA CRF 450 X 2024
HONDA CRF 450 X 2023
HONDA CRF 450 X 2022
HONDA CRF 450 X 2021
HONDA CRF 450 X 2020
HONDA CRF 450 X 2019
HONDA CRF 450 X 2018