- New
Swig ARM repair KIT for blaster 1988-03 PIVOT WORKS for YAMAHA YFS 200 BLASTER 2WD 1990-2006
€69.90
Tax Included
The bearings that let the swingarm pivot freely so the rear suspension works properly.
PIVOT WORKS offers this swingarm bearing kit for YAMAHA YFS 200 BLASTER 2WD 1990-2006. The swingarm pivots on needle bearings protected by seals. Water and mud make them seize: the suspension gets stiff and play appears.
What is this bearing made of?
Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.
- Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
- Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
- Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.
Why choose PIVOT WORKS?
Pivot Works kits, sold by the American All Balls Racing group, use hardened NTN, NSK or Koyo bearings from original-equipment bearing suppliers, supplied pre-greased with their seals; every kit carries the Pivot Works limited lifetime warranty.
When should you replace this part?
Side play when you rock the swingarm with the rear wheel removed, or a notchy movement: the bearings need changing.
Specifications and fitting tips
- Manufacturer part number: PWSAK-Y13-000
Cross-Mania tip: Press out the old bearings, grease the new ones and check the swingarm pivot: if it is marked, replace it too.
Also needed with this part
- Grease : MOTUL 100 400 g · MOTUL 400 g
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA YFS 200 BLASTER 2WD 2006
YAMAHA YFS 200 BLASTER 2WD 2005
YAMAHA YFS 200 BLASTER 2WD 2004
YAMAHA YFS 200 BLASTER 2WD 2003
YAMAHA YFS 200 BLASTER 2WD 2002
YAMAHA YFS 200 BLASTER 2WD 2001
YAMAHA YFS 200 BLASTER 2WD 2000
YAMAHA YFS 200 BLASTER 2WD 1999
YAMAHA YFS 200 BLASTER 2WD 1998
YAMAHA YFS 200 BLASTER 2WD 1997
YAMAHA YFS 200 BLASTER 2WD 1996
YAMAHA YFS 200 BLASTER 2WD 1995
YAMAHA YFS 200 BLASTER 2WD 1994
YAMAHA YFS 200 BLASTER 2WD 1993
YAMAHA YFS 200 BLASTER 2WD 1992
YAMAHA YFS 200 BLASTER 2WD 1991
YAMAHA YFS 200 BLASTER 2WD 1990
PWSAK-Y13-000
3 Items
Specific References
No customer reviews for the moment.
The bearings that let the swingarm pivot freely so the rear suspension works properly.
Swig ARM repair KIT for blaster 1988-03 PIVOT WORKS for YAMAHA YFS 200 BLASTER 2WD 1990-2006
€69.90
Tax Included