• New
    PIVOT WORKS front wheel bearing and seal kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD from 1983 to 2003
    PIVOT WORKS front wheel bearing and seal kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD from 1983 to 2003

    PIVOT WORKS front wheel bearing and seal kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD from 1983 to 2003

    Review (0)
    €11.58
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    The bearing that lets the wheel spin freely on its axle.

    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

    Wishlist
    Write your review

      PIVOT WORKS offers this wheel bearing for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD, LT-F 250 OZARK 2WD 1983-2003. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

      What is this bearing made of?

      Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

      • Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
      • Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
      • Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

      Why choose PIVOT WORKS?

      Pivot Works kits, sold by the American All Balls Racing group, use hardened NTN, NSK or Koyo bearings from original-equipment bearing suppliers, supplied pre-greased with their seals; every kit carries the Pivot Works limited lifetime warranty.

      When should you replace the bearings on your SUZUKI LT-F 160 QUADRUNNER 2WD?

      Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

      Specifications and fitting tips

      • Manufacturer part number: PWFWK-S13-020

      Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      SUZUKI LT 125 QUADRUNNER 2WD 1987
      SUZUKI LT 125 QUADRUNNER 2WD 1986
      SUZUKI LT 125 QUADRUNNER 2WD 1985
      SUZUKI LT 125 QUADRUNNER 2WD 1984
      SUZUKI LT 125 QUADRUNNER 2WD 1983
      SUZUKI LT-F 160 QUADRUNNER 2WD 2001
      SUZUKI LT-F 160 QUADRUNNER 2WD 2000
      SUZUKI LT-F 160 QUADRUNNER 2WD 1999
      SUZUKI LT-F 160 QUADRUNNER 2WD 1998
      SUZUKI LT-F 160 QUADRUNNER 2WD 1997
      SUZUKI LT-F 160 QUADRUNNER 2WD 1996
      SUZUKI LT-F 160 QUADRUNNER 2WD 1995
      SUZUKI LT-F 160 QUADRUNNER 2WD 1994
      SUZUKI LT-F 160 QUADRUNNER 2WD 1993
      SUZUKI LT-F 160 QUADRUNNER 2WD 1992
      SUZUKI LT-F 160 QUADRUNNER 2WD 1991
      SUZUKI LT-F 250 OZARK 2WD 2003
      SUZUKI LT-F 250 OZARK 2WD 2002

      PIVOT WORKS
      PWFWK-S13-020
      2 Items

      Specific References

      Write your review

      No customer reviews for the moment.

      Write your review
      PIVOT WORKS front wheel bearing and seal kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD from 1983 to 2003
      PIVOT WORKS front wheel bearing and seal kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD from 1983 to 2003
      PIVOT WORKS Front Wheel Bearings And Seals Kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD, LT-F 250 OZARK 2WD
      PIVOT WORKS front wheel bearing and seal kit for SUZUKI LT 125 QUADRUNNER 2WD, LT-F 160 QUADRUNNER 2WD from 1983 to 2003
      €11.58
      Tax Included