- New
Shock absorber bearing KIT for -99 PIVOT WORKS for SUZUKI RM 125, RM 250 1996-1999
€60.90
Tax Included
The bearings and bushings that let the rear shock pivot freely at its mounts.
PIVOT WORKS offers this shock bearing kit for SUZUKI RM 125, RM 250 1996-1999. The rear shock is mounted at the top to the frame and at the bottom to the linkage or the swingarm.
Why replace the shock bearings?
The benefits:
- A supple rear suspension again, one that follows the ground well.
- Get rid of play and knocking at the rear.
- Restore the shock without replacing it.
Why choose PIVOT WORKS?
Pivot Works kits, sold by the American All Balls Racing group, use hardened NTN, NSK or Koyo bearings from original-equipment bearing suppliers, supplied pre-greased with their seals; every kit carries the Pivot Works limited lifetime warranty.
When should you replace the bearings on your SUZUKI RM 125?
Replace them when you feel play while lifting the rear wheel, a rough spot appears or the spherical bearing is rusty or seized.
Specifications and fitting tips
- Manufacturer part number: PWSHK-S08-021
Cross-Mania tip: Grease with waterproof grease and tighten the bolts to the specified torque.
Also needed with this part
- Grease : SHOWA 500 g · KYB
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
SUZUKI RM 125 1999
SUZUKI RM 125 1998
SUZUKI RM 125 1997
SUZUKI RM 125 1996
SUZUKI RM 250 1999
SUZUKI RM 250 1998
SUZUKI RM 250 1997
SUZUKI RM 250 1996
PWSHK-S08-021
2 Items
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The bearings and bushings that let the rear shock pivot freely at its mounts.
Shock absorber bearing KIT for -99 PIVOT WORKS for SUZUKI RM 125, RM 250 1996-1999
€60.90
Tax Included