• New
    INNTECK Front Sprocket 13 Teeth for SUZUKI DRZ 400, RM 250 1986-2020
    INNTECK Front Sprocket 13 Teeth for SUZUKI DRZ 400, RM 250 1986-2020

    INNTECK Front Sprocket 13 Teeth for SUZUKI DRZ 400, RM 250 1986-2020

    Review (0)
    €16.90
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    INNTECK 13 dents front sprocket for SUZUKI DRZ 400, RM 250 from 1986 to 2020.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

      On SUZUKI DRZ 400, RM 250 from 1986 to 2020, the INNTECK 13 dents 432KC-13 front sprocket fits in place of the original part. Mounted on the gearbox output shaft (countershaft), the front sprocket passes the engine's torque on to the chain. Every tooth is loaded on every turn of the wheel: a worn front sprocket makes the chain jump and speeds up wear on the whole drivetrain.

      Specifications

      • Brand: INNTECK
      • Manufacturer part number: 432KC-13

      When to replace it?

      • Teeth thinned, pointed or hooked.
      • Chain that jumps or slaps under acceleration.
      • Play between the sprocket and the shaft, or marked splines.

      Check it every time you service the chain and replace it along with the rear sprocket and the chain. Many riders change the front sprocket with every new chain, because it wears much faster than the rear sprocket.

      Fitting tips

      1. Loosen the sprocket nut or bolt while holding the rear wheel with the brake, before slackening the chain.
      2. Clean the countershaft and check the oil seal behind the sprocket.
      3. Fit the sprocket the right way round, with a lock washer or threadlocker as on the original assembly, and tighten to the manufacturer's torque.
      4. Set the chain tension and lube it with chain lube.

      Spare parts and items to plan

      Frequently asked questions

      Should the rear sprocket be changed too?
      If it's worn, yes: a new front sprocket running on a tired rear sprocket and chain is worn out within a few hours.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      SUZUKI DRZ 400 2020
      SUZUKI DRZ 400 2019
      SUZUKI DRZ 400 2018
      SUZUKI DRZ 400 2017
      SUZUKI DRZ 400 2016
      SUZUKI DRZ 400 2015
      SUZUKI DRZ 400 2014
      SUZUKI DRZ 400 2013
      SUZUKI DRZ 400 2012
      SUZUKI DRZ 400 2011
      SUZUKI DRZ 400 2010
      SUZUKI DRZ 400 2009
      SUZUKI DRZ 400 2008
      SUZUKI DRZ 400 2007
      SUZUKI DRZ 400 2006
      SUZUKI DRZ 400 2005
      SUZUKI DRZ 400 2004
      SUZUKI DRZ 400 2003
      SUZUKI DRZ 400 2002
      SUZUKI DRZ 400 2001
      SUZUKI DRZ 400 2000
      SUZUKI RM 250 2008
      SUZUKI RM 250 2007
      SUZUKI RM 250 2006
      SUZUKI RM 250 2005
      SUZUKI RM 250 2004
      SUZUKI RM 250 2003
      SUZUKI RM 250 2002
      SUZUKI RM 250 2001
      SUZUKI RM 250 2000
      SUZUKI RM 250 1999
      SUZUKI RM 250 1998
      SUZUKI RM 250 1997
      SUZUKI RM 250 1996
      SUZUKI RM 250 1995
      SUZUKI RM 250 1994
      SUZUKI RM 250 1993
      SUZUKI RM 250 1992
      SUZUKI RM 250 1991
      SUZUKI RM 250 1990
      SUZUKI RM 250 1989
      SUZUKI RM 250 1988
      SUZUKI RM 250 1987
      SUZUKI RM 250 1986

      INNTECK
      432KC-13
      6 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      INNTECK Front Sprocket 13 Teeth for SUZUKI DRZ 400, RM 250 1986-2020
      INNTECK Front Sprocket 13 Teeth for SUZUKI DRZ 400, RM 250 1986-2020
      INNTECK Front Sprocket 13 Teeth for SUZUKI DRZ 400, RM 250 1986-2020
      €16.90
      Tax Included