ALL BALLS Steering Stem Bearing Kit for KAWASAKI KVF 300 BRUTE FORCE 2WD and KYMCO MXU 500 2007-2025

ALL BALLS offers this steering bearing kit for KAWASAKI KVF 300 BRUTE FORCE 2WD and KYMCO MXU 500 2007-2025. The steering stem, which joins the fork to the frame, turns on two bearings: one at the top, one at the bottom.

What is this bearing made of?

Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

• Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
• Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
• Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

Why choose ALL BALLS?

Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.

When should you replace the steering bearings?

A notch in the straight-ahead position or a clunk under braking, front wheel lifted: the bearings need changing.

Specifications and fitting tips

• Manufacturer part number: 25-1722

Cross-Mania tip: Drive the races in cold, grease generously and set the preload: the steering must turn freely with no play.

Also needed with this part

• Grease : MOTUL 100 100 cl · MOTUL 100 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
KAWASAKI KVF 300 BRUTE FORCE 2WD 2025
KAWASAKI KVF 300 BRUTE FORCE 2WD 2024
KAWASAKI KVF 300 BRUTE FORCE 2WD 2023
KAWASAKI KVF 300 BRUTE FORCE 2WD 2022
KAWASAKI KVF 300 BRUTE FORCE 2WD 2021
KAWASAKI KVF 300 BRUTE FORCE 2WD 2020
KAWASAKI KVF 300 BRUTE FORCE 2WD 2018
KAWASAKI KVF 300 BRUTE FORCE 2WD 2017
KAWASAKI KVF 300 BRUTE FORCE 2WD 2016
KAWASAKI KVF 300 BRUTE FORCE 2WD 2015
KAWASAKI KVF 300 BRUTE FORCE 2WD 2014
KAWASAKI KVF 300 BRUTE FORCE 2WD 2013
KAWASAKI KVF 300 BRUTE FORCE 2WD 2012
KYMCO MXU 500 2009
KYMCO MXU 500 2008
KYMCO MXU 500 2007