TECNIUM Fork Oil Seals without Dust Covers - 50x63x11 mm for HUSQVARNA CR 125, TC 250, TC 610, TE 250 I.E 4T, WR 250 1996-2014

TECNIUM offers these fork seals for HUSQVARNA CR 125, TC 250, TC 610, TE 250 I.E 4T, WR 250 1996-2014. The fork and the shock work with oil. Where the fork tube or the shock shaft slides, an oil seal keeps the oil inside and a dust seal, fitted in front of it, wipes off mud and sand.

Why replace these seals?

The benefits:

• Stop oil leaks from the fork or shock.
• Get back consistent damping, ride after ride.
• A new dust seal protects the oil seal and makes it last longer.

When should you replace the seals on your HUSQVARNA WR 250?

Oil on the fork tube after a ride, even a little: clean under the dust wiper; if the leak comes back, the seals need changing.

Specifications and fitting tips

• Packing: by pair
• Quantity: 2 Oil Seals / 2 Dust Covers
• Manufacturer part number: L28-0079

Cross-Mania tip: Replace seals and dust wipers together, protect the lips when sliding them over the tube and refill the fork oil to the correct level.

Also needed with this part

• Fork oil : LIQUI MOLY 7.5W 500 ml · LIQUI MOLY 5W 500 ml
• Fork rebuild kit : KAYABA 110034800102 · KAYABA 110044800102

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA CR 125 2011
HUSQVARNA CR 125 2010
HUSQVARNA TC 250 2011
HUSQVARNA TC 250 2010
HUSQVARNA TC 610 1998
HUSQVARNA TC 610 1997
HUSQVARNA TC 610 1996
HUSQVARNA TE 250 I.E 4T 2014
HUSQVARNA TE 250 I.E 4T 2013
HUSQVARNA TE 250 I.E 4T 2012
HUSQVARNA TE 250 I.E 4T 2011
HUSQVARNA TE 250 I.E 4T 2010
HUSQVARNA TE 410 1998
HUSQVARNA TE 410 1997
HUSQVARNA TE 610 1998
HUSQVARNA TE 610 1997
HUSQVARNA WR 125 2011
HUSQVARNA WR 125 2010
HUSQVARNA WR 250 2013
HUSQVARNA WR 250 2012
HUSQVARNA WR 250 2011
HUSQVARNA WR 250 2010
HUSQVARNA WR 250 2009
HUSQVARNA WR 250 1998
HUSQVARNA WR 250 1997
HUSQVARNA WR 360 1998
HUSQVARNA WR 360 1997