• New
    INNTECK Front Sprocket 12 Teeth for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 2000-2026
    INNTECK Front Sprocket 12 Teeth for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 2000-2026

    INNTECK Front Sprocket 12 Teeth for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 2000-2026

    Review (0)
    €16.90
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    INNTECK 12 dents front sprocket for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 from 2000 to 2026.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

      On GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 from 2000 to 2026, the INNTECK 12 dents 4048K-12 front sprocket fits in place of the original part. Mounted on the gearbox output shaft (countershaft), the front sprocket passes the engine's torque on to the chain. Every tooth is loaded on every turn of the wheel: a worn front sprocket makes the chain jump and speeds up wear on the whole drivetrain.

      Specifications

      • Brand: INNTECK
      • Manufacturer part number: 4048K-12
      • Engine: 2-stroke

      When to replace it?

      • Teeth thinned, pointed or hooked.
      • Chain that jumps or slaps under acceleration.
      • Play between the sprocket and the shaft, or marked splines.

      Check it every time you service the chain and replace it along with the rear sprocket and the chain. Many riders change the front sprocket with every new chain, because it wears much faster than the rear sprocket.

      Fitting tips

      1. Loosen the sprocket nut or bolt while holding the rear wheel with the brake, before slackening the chain.
      2. Clean the countershaft and check the oil seal behind the sprocket.
      3. Fit the sprocket the right way round, with a lock washer or threadlocker as on the original assembly, and tighten to the manufacturer's torque.
      4. Set the chain tension and lube it with chain lube.

      Spare parts and items to plan

      Frequently asked questions

      Should the rear sprocket be changed too?
      If it's worn, yes: a new front sprocket running on a tired rear sprocket and chain is worn out within a few hours.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EC 250 2019
      GAS GAS EC 250 2018
      GAS GAS EC 250 2015
      GAS GAS EC 250 2014
      GAS GAS EC 250 2013
      GAS GAS EC 250 2012
      GAS GAS EC 250 2011
      GAS GAS EC 250 2010
      GAS GAS EC 250 2009
      GAS GAS EC 250 2008
      GAS GAS EC 250 2007
      GAS GAS EC 250 2006
      GAS GAS EC 250 2005
      GAS GAS EC 250 2004
      GAS GAS EC 250 2003
      GAS GAS EC 250 2002
      GAS GAS EC 250 2001
      GAS GAS EC 250 2000
      GAS GAS EC 300 2019
      GAS GAS EC 300 2018
      GAS GAS EC 300 2015
      GAS GAS EC 300 2014
      GAS GAS EC 300 2013
      GAS GAS EC 300 2012
      GAS GAS EC 300 2011
      GAS GAS EC 300 2010
      GAS GAS EC 300 2009
      GAS GAS EC 300 2008
      GAS GAS EC 300 2007
      GAS GAS EC 300 2006
      GAS GAS EC 300 2005
      GAS GAS EC 300 2004
      GAS GAS EC 300 2003
      GAS GAS EC 300 2002
      GAS GAS EC 300 2001
      GAS GAS EC 300 2000
      GAS GAS XC 250 2019
      GAS GAS XC 250 2018
      GAS GAS XC 300 2019
      GAS GAS XC 300 2018
      RIEJU MR 250 2026
      RIEJU MR 250 2025
      RIEJU MR 250 2024
      RIEJU MR 250 2023
      RIEJU MR 250 2022
      RIEJU MR 250 2021
      RIEJU MR 300 2026
      RIEJU MR 300 2025
      RIEJU MR 300 2024
      RIEJU MR 300 2023
      RIEJU MR 300 2022
      RIEJU MR 300 2021

      INNTECK
      4048K-12
      9 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      INNTECK Front Sprocket 12 Teeth for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 2000-2026
      INNTECK Front Sprocket 12 Teeth for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 2000-2026
      INNTECK Front Sprocket 12 Teeth for GAS GAS EC 250, EC 300, XC 250, XC 300 and RIEJU MR 250, MR 300 2000-2026
      €16.90
      Tax Included