AFAM steel front sprocket 415 pitch for KTM SX 50 PRO SENIOR LC 2003-2005

AFAM offers this front sprocket for KTM SX 50 PRO SENIOR LC 2003-2005. The front sprocket sits on the gearbox output shaft and passes the engine’s power to the chain, which turns the rear sprocket and the rear wheel.

Why replace the front sprocket?

The benefits:

• An inexpensive part that protects a new chain and rear sprocket.
• Made of steel to withstand much heavier wear than the rear sprocket.
• Changing the number of teeth is the simplest, cheapest way to alter the gearing.

When should you replace the front sprocket on your KTM SX 50 PRO SENIOR LC?

Dished or hooked teeth: replace it straight away, otherwise it will ruin a new chain within hours.

Specifications and fitting tips

• Chain pitch: 415
• Material: Steel
• Front sprocket version: Standard
• Standard steel front-sprocket
• Top of range manufacturing and quality

Choose the number of teeth from the list: fewer teeth on the front sprocket (or more on the rear) gives more acceleration, the opposite gives a longer gearing.

Cross-Mania tip: Replace the front sprocket together with the chain and rear sprocket, renew the sprocket nut or circlip and check the output shaft seal.

Also needed with this part

• Rear sprocket : see the selection
• Drive chain : see the selection
• Chain lube : LIQUI MOLY 400 ml · LIQUI MOLY 250 ml

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
KTM SX 50 PRO SENIOR LC 2005
KTM SX 50 PRO SENIOR LC 2004
KTM SX 50 PRO SENIOR LC 2003