MOTION PRO clutch tool

MOTION PRO offers this clutch tool. The clutch, the primary gear or the CVT is held on by a very tight centre nut. When you try to undo it, the whole part turns with the wrench.

Why a clutch holding tool?

The benefits:

• It bears on several teeth or lugs at once: the load is spread and nothing breaks.
• No more screwdriver or coin jammed in the gears: no more risk of chipping a tooth.
• Depending on the model, a tool made for the vehicle’s CVT: the pulleys come apart without damaging the faces the belt runs on.

Why choose MOTION PRO?

Motion Pro was founded in California in 1984 by Chris Carter, a former Yamaha off-road test rider and ISDT gold medallist; having started out with control cables, the company now holds more than 30 patents.

When should you replace this tool?

Worn teeth or lugs, a bent arm, deformed locating pins: replace the tool, it slips under load and can break teeth on the basket or the gear.

Specifications and fitting tips

• Manufacturer part number: 08-0427

Cross-Mania tip: Check that the tool matches your engine or vehicle, seat it firmly before applying force, then tighten the centre nut to the manual’s torque, often with threadlocker or a new lock washer.

Compatibility

Workshop tool: it works on any motorcycle or ATV. Just check the size or dimension stated.