IRON BALTIC Clutch Holding Tool - CFMOTO CVTECH

IRON BALTIC offers this clutch tool. The clutch, the primary gear or the CVT is held on by a very tight centre nut. When you try to undo it, the whole part turns with the wrench.

Why a clutch holding tool?

The benefits:

• It bears on several teeth or lugs at once: the load is spread and nothing breaks.
• No more screwdriver or coin jammed in the gears: no more risk of chipping a tooth.
• Depending on the model, a tool made for the vehicle’s CVT: the pulleys come apart without damaging the faces the belt runs on.

Why choose IRON BALTIC?

Founded in Estonia in 2006 by two engineers, Iron Baltic started out making custom ATV skid plates and still designs and manufactures its products in Estonia. Its skid plates come in 4 mm brushed marine aluminium or 10 mm HDPE.

When should you replace this tool?

Worn teeth or lugs, a bent arm, deformed locating pins: replace the tool, it slips under load and can break teeth on the basket or the gear.

Specifications and fitting tips

• Service tool for CVTech LP3 variator / clutch works.
• Stong steel construction
• Manufacturer part number: 80.1700

Cross-Mania tip: Check that the tool matches your engine or vehicle, seat it firmly before applying force, then tighten the centre nut to the manual’s torque, often with threadlocker or a new lock washer.

Compatibility

Tool made for the make or model named in the title: check that it matches your motorcycle or ATV before ordering.