• New
    AIRSAL Piston for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011
    AIRSAL Piston for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011

    AIRSAL Piston for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011

    Review (0)
    €34.55
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      AIRSAL offers this piston kit for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose AIRSAL?

      Airsal, the Spanish two-stroke cylinder specialist since 1986: aluminium cylinder with a nickel-silicon-carbide coating, far more wear-resistant than cast iron.

      When should you replace the piston?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

      Specifications and fitting tips

      • Material: Aluminium
      • Specificity: T6 (Heat Treatment Process)
      • Piston compression: Standard
      • Piston type: Forged
      • Oversize Letter: A
      • Bullet (d x l): 14 x 37 mm.
      • Manufacturer part number: 06125852

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      BETA RR 125 2011
      BETA RR 125 2010
      YAMAHA WR 125 2010
      YAMAHA WR 125 2009
      YAMAHA WR 125 X 2010
      YAMAHA WR 125 X 2009

      AIRSAL
      06125852
      15 Items

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      AIRSAL Piston for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011
      AIRSAL Piston for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011
      AIRSAL Piston for YAMAHA WR 125, WR 125 X and BETA RR 125 2009-2011
      €34.55
      Tax Included