• New
    WOSSNER piston kit for KTM SX-F 450 from 2007 to 2012
    WOSSNER piston kit for KTM SX-F 450 from 2007 to 2012

    WOSSNER piston kit for KTM SX-F 450 from 2007 to 2012

    Review (0)
    €236.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      WOSSNER offers this piston kit for KTM SX-F 450 from 2007 to 2012. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose WOSSNER?

      Wössner has forged its own pistons since 1994: Molykote-coated skirt to reduce friction and ease running-in, kit supplied complete with rings, pin and clips.

      When should you replace the piston on your KTM SX-F 450?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 30 h in hard use and every 60 h for leisure.

      Specifications and fitting tips

      • Bore: 77.00 mm
      • Displacement: 400 cm³
      • Piston diameter: 96.96 mm
      • Piston material: Aluminium alloy, Forged
      • Ring material: Nitride coating, Steel, Cast
      • Forged piston: aerospace-grade aluminium alloy, closed-die forged for high tensile and fatigue strength

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KTM SX-F 450 2012
      KTM SX-F 450 2011
      KTM SX-F 450 2010
      KTM SX-F 450 2009
      KTM SX-F 450 2008
      KTM SX-F 450 2007

      WOSSNER
      8665DA
      4 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      WOSSNER piston kit for KTM SX-F 450 from 2007 to 2012
      WOSSNER piston kit for KTM SX-F 450 from 2007 to 2012
      WOSSNER piston kit for KTM SX-F 450 from 2007 to 2012
      €236.90
      Tax Included