DRAPER sockets and ratchet

DRAPER offers these sockets and ratchet. A socket is a kind of short tube that fits right over the head of a nut or bolt. It goes on a ratchet, a handle that drives in one direction and turns freely in the other, so you do not have to reposition the tool at every stroke.

Why sockets and a ratchet?

The benefits:

• 6-point socket: it bears on the flats of the nut rather than its corners, ideal for very tight nuts; a 12-point engages more easily in a tight spot.
• Treated chrome-vanadium steel: the socket does not flare and its flats stay crisp.
• Depending on the model, castellated sockets sized for steering or swingarm nuts, which cannot be tightened properly with any other wrench.

Why choose DRAPER?

Draper is a British family business founded in 1919 by Bert Draper in Kingston upon Thames, based since 1963 in Chandler’s Ford, Hampshire, and run by the family for three generations. Its catalogue lists more than 11,000 hand, power and automotive tools and workshop equipment items.

When should you replace this tool?

A cracked, flared or rounded socket, a ratchet that skips teeth, a marked drive square or one with play: replace the part, it slips and damages the nuts.

Specifications and fitting tips

• Manufacturer part number: 65019

Cross-Mania tip: Use a 6-point socket on tight or slightly rounded nuts, push it fully onto the nut before applying force and check that the drive size (1/4", 3/8", 1/2") matches your ratchet, or use an adaptor.

Compatibility

Workshop tool: it works on any motorcycle or ATV. Just check the size or dimension stated.