ALL BALLS Rear Independent Suspension Bearing Kit for POLARIS SCRAMBLER 850, SPORTSMAN 550 EPS, SPORTSMAN 550 FOREST 2013-2014

ALL BALLS offers this engine bearing for POLARIS SCRAMBLER 850, SPORTSMAN 550 EPS, SPORTSMAN 550 FOREST, SPORTSMAN 550 TOURING EPS, SPORTSMAN 550 X2 2013-2014. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

What is this bearing made of?

Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

• Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
• C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
• Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

Why choose ALL BALLS?

Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.

When should you replace the bearings on your POLARIS SCRAMBLER 850?

On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

Specifications and fitting tips

• Manufacturer part number: 50-1102

Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

Also needed with this part

• 4-stroke engine oil : MOTUL 10W50 · LIQUI MOLY 10W40 1 L

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
POLARIS SCRAMBLER 850 2014
POLARIS SPORTSMAN 550 EPS 2014
POLARIS SPORTSMAN 550 FOREST 2013
POLARIS SPORTSMAN 550 TOURING EPS 2014
POLARIS SPORTSMAN 550 X2 2014
POLARIS SPORTSMAN 550 XP 2014
POLARIS SPORTSMAN 850 EPS 2014