- New
ALL BALLS Shock Absorber Bearing Kit for CAN-AM COMMANDER 1000 R EFI LTD, COMMANDER MAX 1000 R EFI LTD, RENEGADE 1000 R EFI XMR
€40.90
Tax Included
An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.
ALL BALLS offers this engine bearing for CAN-AM COMMANDER 1000 R EFI LTD, COMMANDER MAX 1000 R EFI LTD, RENEGADE 1000, RENEGADE 1000 R EFI XMR, RENEGADE 1000 R EFI XXC 2018-2022. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.
What is this bearing made of?
Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.
- Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
- C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
- Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.
Why choose ALL BALLS?
Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.
When should you replace the bearings on your CAN-AM RENEGADE 1000 R EFI XMR?
On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.
Specifications and fitting tips
- Manufacturer part number: 21-0026
Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.
Also needed with this part
- 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
CAN-AM COMMANDER 1000 R EFI LTD 2020
CAN-AM COMMANDER 1000 R EFI LTD 2019
CAN-AM COMMANDER 1000 R EFI LTD 2018
CAN-AM COMMANDER MAX 1000 R EFI LTD 2020
CAN-AM COMMANDER MAX 1000 R EFI LTD 2019
CAN-AM COMMANDER MAX 1000 R EFI LTD 2018
CAN-AM RENEGADE 1000 2019
CAN-AM RENEGADE 1000 R EFI XMR 2022
CAN-AM RENEGADE 1000 R EFI XMR 2021
CAN-AM RENEGADE 1000 R EFI XMR 2020
CAN-AM RENEGADE 1000 R EFI XMR 2019
CAN-AM RENEGADE 1000 R EFI XXC 2019
CAN-AM RENEGADE 570 2019
CAN-AM RENEGADE 570 EFI XMR 2019
CAN-AM RENEGADE 850 2019
CAN-AM RENEGADE 850 EFI XXC 2019
21-0026
2 Items
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
An engine bearing: it lets a shaft (crank, gearbox, pump) turn without friction.
ALL BALLS Shock Absorber Bearing Kit for CAN-AM COMMANDER 1000 R EFI LTD, COMMANDER MAX 1000 R EFI LTD, RENEGADE 1000 R EFI XMR
€40.90
Tax Included