SELLE DALLA VALLE Wave Seat Cover - Blue for KTM SX 85, SX 105 and HUSQVARNA TC 85 2003-2017

On KTM SX 85, SX 105 and HUSQVARNA TC 85 from 2003 to 2017, the SELLE DALLA VALLE Wave - bleu SDV006WB seat cover fits in place of the original part. Worn, torn or gone smooth, the cover lets water soak into the foam, which gets heavier and breaks down. A new cover gives the rider back their grip and protects the foam for longer.

Key features

• Wave cover: moderate grip at the front and a padded non-slip rear section, so you can shift position without standing up; suited to endurance riding.
• Cover hand-stitched in Italy.

Specifications

• Brand: SELLE DALLA VALLE
• Manufacturer part number: SDV006WB
• EAN code: 8057018263349
• Weight: 300 g

When to replace it?

• Cover split, coming unstitched or holed: water gets into the foam.
• Surface gone smooth: you slide back under acceleration.
• Foam that stays damp after washing.
• New graphics: a colour to match the plastics.

Replace the cover as soon as it splits or comes unstitched: waterlogged foam compresses and breaks down from the inside. Check that it fits your model and its years: the shape of the seat changes from one generation to the next.

Fitting tips

1. Remove the seat and pull out the old cover's staples with pliers or a thin screwdriver, without damaging the foam.
2. Take the opportunity to check the seat foam: if it's compressed or torn, replace it.
3. Centre the new cover and staple it first in the middle at the front and rear, then along the sides, stretching the material gradually.
4. Put a staple every 2 to 3 cm; if needed, warm the cover slightly with a heat gun to shape it without wrinkles.
5. Trim off the excess material and refit the seat.

Why SELLE DALLA VALLE?

Founded in 1970, Selle Dalla Valle makes hand-stitched seat covers in Italy, in top-grade PVC. The brand supplies manufacturers such as BMW, Ducati, Husqvarna and KTM, and its covers have been used by Antonio Cairoli and Jeffrey Herlings.

Spare parts and items to plan

• Seat foam : see the selection

Frequently asked questions

What tools do I need?
A heavy-duty stapler (manual or pneumatic) and short stainless steel staples, which won't rust with washing.

Is the cover waterproof?
In good condition it stops water getting in from the top, but water can still get in through the staples and the underside of the seat. Let the seat dry after washing.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA TC 85 2017
HUSQVARNA TC 85 2016
HUSQVARNA TC 85 2015
HUSQVARNA TC 85 2014
KTM SX 85 2017
KTM SX 85 2016
KTM SX 85 2015
KTM SX 85 2014
KTM SX 85 2013
KTM SX 85 2012
KTM SX 85 2011
KTM SX 85 2010
KTM SX 85 2009
KTM SX 85 2008
KTM SX 85 2007
KTM SX 85 2006
KTM SX 85 2005
KTM SX 85 2004
KTM SX 85 2003
KTM SX 105 2011
KTM SX 105 2010
KTM SX 105 2009
KTM SX 105 2008
KTM SX 105 2007
KTM SX 105 2006
KTM SX 105 2005
KTM SX 105 2004