RACETECH Seat Foam tall (+15 mm) for SHERCO SE 250, SE 300, SEF 250, SEF 300 2012-2016

The RACETECH R-SPUSHEH0015 seat foam is designed for SHERCO SE 250, SE 300, SEF 250, SEF 300 from 2012 to 2016. The seat foam absorbs bumps when you're sitting down and gives the seat its shape. Over the hours it compresses, hollows out where you sit and soaks up water: the seat becomes uncomfortable and your position on the bike changes.

Specifications

• Brand: RACETECH
• Manufacturer part number: R-SPUSHEH0015
• EAN code: 8057094126118

When to replace it?

• Seat hollowed out: you can feel the seat base when sitting down.
• Foam waterlogged, crumbling or smelly.
• Seat lower than stock, riding position altered.
• Tall rider bothered by the stock height.

Replace the foam when it's compressed or waterlogged, ideally at the same time as the cover. The height is given in the name: standard to get back the stock seat, tall (+10 or +15 mm depending on the model) for a tall rider or one who prefers a higher position.

Fitting tips

1. Remove the seat, then take out the staples and the cover.
2. Remove the old foam, clean the base and check that it isn't cracked.
3. Fit the new foam squarely on the base; a little spray adhesive on the base stops it moving.
4. Staple on a new or good-condition seat cover, pulled tight, working from the centre out to the ends.

Why RACETECH?

Racetech, now also sold under the Rtech name, is an Italian brand launched in 2002 by Cristian Mittone, a former professional enduro rider, and based in Premariacco, near Udine. Its catalogue runs to more than 5,000 parts in plastic, aluminium and rubber, from plastic kits to handguards and chain guides.

Spare parts and items to plan

• Seat cover : BLACKBIRD 1E01N · BLACKBIRD 1E01G- 1E01G/01

Frequently asked questions

Does a tall foam change the seat height?
Yes, by the amount given in the name. Make sure you can still put a foot down confidently, especially in enduro.

Can I keep my cover?
If it's in good condition, yes. On a tall foam the original cover may be a tight fit: a new cover is easier to stretch into place.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
SHERCO SE 250 2016
SHERCO SE 250 2015
SHERCO SE 250 2014
SHERCO SE 300 2016
SHERCO SE 300 2015
SHERCO SE 300 2014
SHERCO SEF 250 2016
SHERCO SEF 250 2015
SHERCO SEF 250 2014
SHERCO SEF 250 2013
SHERCO SEF 250 2012
SHERCO SEF 300 2016
SHERCO SEF 300 2015
SHERCO SEF 300 2014
SHERCO SEF 300 2013
SHERCO SEF 300 2012