INNTECK Seat Cover - Blue for HUSABERG FE 250, FE 350, FE 450, FE 501, TE 125, TE 250, TE 300 2013-2014

The INNTECK CS-10051 seat cover is designed for HUSABERG FE 250, FE 350, FE 450, FE 501, TE 125, TE 250, TE 300 from 2013 to 2014. Worn, torn or gone smooth, the cover lets water soak into the foam, which gets heavier and breaks down. A new cover gives the rider back their grip and protects the foam for longer.

Specifications

• Brand: INNTECK
• Manufacturer part number: CS-10051

When to replace it?

• Cover split, coming unstitched or holed: water gets into the foam.
• Surface gone smooth: you slide back under acceleration.
• Foam that stays damp after washing.
• New graphics: a colour to match the plastics.

Replace the cover as soon as it splits or comes unstitched: waterlogged foam compresses and breaks down from the inside. Check that it fits your model and its years: the shape of the seat changes from one generation to the next.

Fitting tips

1. Remove the seat and pull out the old cover's staples with pliers or a thin screwdriver, without damaging the foam.
2. Take the opportunity to check the seat foam: if it's compressed or torn, replace it.
3. Centre the new cover and staple it first in the middle at the front and rear, then along the sides, stretching the material gradually.
4. Put a staple every 2 to 3 cm; if needed, warm the cover slightly with a heat gun to shape it without wrinkles.
5. Trim off the excess material and refit the seat.

Why INNTECK?

Innteck was founded in 2004 in La Morra, in Piedmont (Italy). A distributor of motorcycle parts and accessories, it also develops its own range of off-road parts, and joined the Italian Athena group at the end of 2023.

Spare parts and items to plan

• Seat foam : BLACKBIRD · RACETECH

Frequently asked questions

What tools do I need?
A heavy-duty stapler (manual or pneumatic) and short stainless steel staples, which won't rust with washing.

Is the cover waterproof?
In good condition it stops water getting in from the top, but water can still get in through the staples and the underside of the seat. Let the seat dry after washing.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSABERG FE 250 2014
HUSABERG FE 250 2013
HUSABERG FE 350 2014
HUSABERG FE 350 2013
HUSABERG FE 450 2014
HUSABERG FE 450 2013
HUSABERG FE 501 2014
HUSABERG FE 501 2013
HUSABERG TE 125 2014
HUSABERG TE 125 2013
HUSABERG TE 250 2014
HUSABERG TE 250 2013
HUSABERG TE 300 2014
HUSABERG TE 300 2013